Filter
Top Products
SPECIFICATIONS KF913
DIMENSIONAL DRAWING
INPUT PLATE
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF913/888058(B)/2 pp 5/1/00 Printed in USA
Manufacturing tolerances are +/-0.13 and +/-1°
A
RIGHT (VIEW A-A)
TOP
A
6.44
10.81
22.00
BACK
22.00
8.56
7.00
40.00
46.00
23.00
30.00
8.75
18.75
42.00
FRONT
30°
15.63
4.50
KF913
CENTER OF BALANCE.
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED.
510542 (1)
EXP 8/27/97 SHB
The medium throw/downfill high frequency module shall
incorporate 3x horn-loaded 2-in exit compression driver HF
transducers. The module shall have a nominal horizontal cov-
erage pattern of 30°. The module’s vertical beam profile shall
be adjustable via complex digital signal processing. The mod-
ule shall be integrated with complementary frequency-specif-
ic modules into a single acoustical unit via complex digital
signal processing.
Module frequency response shall vary no more than ±3 dB
from 500 Hz to 14 kHz measured on axis. The module shall
produce a Sound Pressure Level (SPL) of 114 dB SPL on axis
at 1 meter with a power input of 1 Watt, and shall be capa-
ble of producing a peak output of 148 dB SPL on axis at 1
meter. Each driver shall handle 200 Watts of amplifier power
(AES Standard) and shall have a nominal impedance of 8
Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 1/2-in thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed
polyurethane. Input connectors shall be one each male and
female AP6. The enclosure shall include sixteen 3/8”-16
threaded mounting points (4 each top, bottom and sides).
The front of the loudspeaker shall be covered with a vinyl
coated perforated steel grille backed with open cell foam to
protect against dust.
The medium throw/downfill high frequency module shall be
the EAW model KF913.
KF913
S/N
PIN 1
PIN 2
HF A
HF A
...
...
--
+
PIN 5
PIN 6
HF C
HF C
...
...
--
+
PIN 3
PIN 4
HF B
HF B
...
...
--
+
CANNON
1
2
3
4
5
6
CANNON
1
2
3
4
5
6
AP6-FEMALE
AP6-MALE