Filter
Top Products
Acoustic Performance Partnership Eastern Acoustic Works FR129z
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
SPECIFICATIONS FR129z
A
C
O
U
S
T
I
C
A
L
P
E
R
F
O
R
M
A
N
C
E
P
A
R
T
N
E
R
S
H
I
P
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
TOP
BOTTOM
FRONT
SIDES
BACK
510939 (B)
exp 01/02/00 dpm
FR129z
8.13
C
L
6.25
14.75
(7.36)
30°
C
INPUT
4.19
6.63
1.96
3.63
L
22.50
GRILL PARTIALLY SHOWN
15.00
HANDLE
6.50
12.50
C
L
6.25
POLE MOUNT SOCKET
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (RIVNUT).
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (NUT PLATE).
A & E SPECIFICATIONS
The 2-way full range loudspeaker systems shall incorporate a
12-in LF transducer and a 1-in exit/2-in voice coil compres-
sion driver HF transducer.
The LF driver shall be mounted in a vented enclosure tuned
for optimum low frequency response. The HF driver shall be
loaded with a constant directivity horn with a nominal cov-
erage pattern of 90 (h) x 45° (v). An internal passive filter
network shall provide fourth order acoustical crossover and
system equalization.
System frequency response shall vary no more than ±3 dB
from 80 Hz to 18 kHz measured on axis. The loudspeaker
shall produce a Sound Pressure Level (SPL) of 97 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 130 dB SPL on axis at
1 meter. The loudspeaker shall handle 500 Watts of amplifier
power (AES Standard) and shall have a nominal impedance
of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 1/2-in thickness void-free cross-grain-
laminated Baltic birch plywood and shall be finished in black
polyurethane. Recessed handles and rubber footpads shall
be provided. Input connectors shall be dual Neutrik NL4
Speakon. Three 3/8"-16 threaded mounting points shall be
provided (2 on top, 1 on back) as well as recessed cup to
accept a standmount pole. The front of the loudspeaker shall
be covered with a powder coated perforated steel grille.
The 2-way full range loudspeaker shall be the EAW model
FR129z.
INPUT PLATE
PIN 1--...--
PIN 1+...+
WHITINSVILLE, MA USA
S/N
FR129z
PHYSICAL
Configuration 2-way, full range
Powering Passive LF/HF crossover
LF Subsystem 1x12-in woofer, vented
HF Subsystem 1x 1-in exit/2-in voice coil
compression driver on constant
directivity horn
Cabinet Type (shape) Trapezoidal
Enclosure Materials Baltic birch plywood
Finish Black catalyzed polyurethane
Connectors 2x Neutrik NL4 Speakon
Suspension Hardware (3) 3/8-16 threaded mounting
points (2 top, 1 back), pole mount
cup
Grille Powder coated perforated steel
Dimensions Inches Millimeters
Height 22.50 572
Width (front) 15.00 381
Width (rear) 7.36 187
Depth 14.75 375
Trapezoid Angle 15° per Side
Weights Pounds Kilograms
Net Weight 46 20.9
Shipping Weight 49 22.3
Companion Systems
Sub Bass FR250z