Filter
Top Products
73
XDVD8183 OPERATION
Troubleshooting
Bluetooth
Problem Cause Action
Please connect first
appears in the display
There is no mobile device connected to the head unit Pair and or connect a mobile device to the head unit as
described on page 69
Mobile device will not
connect to the head unit
Bluetooth function is not active on the head unit Activate Bluetooth function as described on page 21
Bluetooth function is not active on the mobile device Refer to the owner's manual of your mobile device
A mobile device is already connected to the head unit
This head unit can only be connected to one device at
a time
Disconnect current mobile device first, then connect
desired mobile device
ERROR! Connect Timeout
appears in the display
The time limit for the pairing mobile device has been
reached
Pair the mobile device within 120 seconds
Pairing Fail appears in
the display
The attempted pairing process has failed Retry the pairing process again
Mobile device will not
connect to the head unit
automatically
The Connect function is set to Manual. When the
Connect function is set to Manual, the head unit will
not connect to any mobile device automatically
Set Connect function to Auto as described on page 69
Ring tone can not be
heard through the
speakers
Ring tone volume is turned down Increase the volume of the ring tone using the rotary
encoder during the ringing process
MUTE function is activated on the head unit Press MUTE to cancel the mute function and resume
audio
Echo or noise is heard
during a phone call
Possible road noise or interior interference Close all open windows and turn off any fans or A/C
Microphone opening on the front panel is obstructed Clear any obstacles in front of microphone opening
Call is connected
(but no audio can be
heard through the
speakers)
Audio is routed to the mobile device Press Audio Transfer to allow audio from the phone to
be heard through the speakers
Call is answered
automatically
Auto Answer function is set to On Set Auto Answer function to Off as described on page 69
Caller ID does not appear
during incoming call
The calling mobile device is not set to send the Caller
ID or, the service is not available
Some devices may not communicate or work properly
with this head unit