Filter
Top Products
32
If the power is switched on while the battery pack is not fully
charged, the player operation may become unstable. Be sure
to charge the battery pack fully before using.
The battery pack is being recharged slowly while the player is
playing with the AC adapter connected.
The battery pack is being recharged separately while the player
is in STAND BY mode with the AC adapter connected.
After connecting the battery pack and power on, press OSD
button on remote control at PLAY / PAUSE or STOP status to
show symbol
. This symbol indicates the condition of the
battery pack.
When the battery pack capacity is low,
will be flashed as a
warning.
AC power operation
1 Connect the DC output plug of the AC adapter to the DC IN jack on the player.
2 Connect the AC adapter to a power socket. Now the player can be operated.
CAUTION:
Be sure to use the AC adapter provided with the player. Before inserting or removing the DC output plug
of the AC adapter, always be sure to turn off the power of the portable DVD player.
Removing the battery pack from the player
The battery pack can be removed from the player as described below.
1 Turn off the power of the player.
2 Turn the battery knob anti-clockwise to unlock and remove the battery pack.