Filter
Top Products
10
Input/Control Side
L- L+ REM R+ R- L- L+ R+ R-
FRONT
SPEAKER
OUTPUTS
REAR
SPEAKER
OUTPUTS
FRONT
GAIN
REAR
GAIN
FRONT INPUTS
L R
REAR INPUTS
L R
BALANCED INPUTS
FRONT REAR
DIN/RCA DIN/RCA
-12dB
-12dB
HANDCRAFTED IN THE USA
By Precision Power
8
9
10
11
12
17
5
4326
1. -12dB
For use with high level inputs (4V up to 12V). Push this switch in to attenuate the
input by 12dB
2. BALANCED / RCA
This switch is used to select between the unbalanced RCA inputs or the
balanced MINI-DIN front inputs. In=MiniDIN. Out=RCA
3. FRONT INPUTS
Plug in the front RCA outputs from your head unit here.
4. BALANCED FRONT AND REAR INPUTS
Plug in the front and rear mini-din outputs from the LDX-33 crossover, LD-3 Line Driver,
or other balanced source here.
5. REAR INPUTS
Plug in the rear RCA outputs from your head unit here.
6. BALANCED / RCA
This switch is used to select between the unbalanced RCA inputs or the
balanced MINI-DIN rear inputs. (See #2)
7. -12dB
For use with high level inputs (4V up to 12V). Push this switch in to attenuate the
input by 12dB. (See #1)
8. FRONT SPEAKER OUTPUTS/REMOTE (Turn-on)
After connecting remote and front speaker wires plug in the connector here.
9. COOLING VENTS
10. FRONT GAIN
Use this control to match the output level of the head unit to the front channels of
the amplifier.
11. REAR GAIN
Use this control to match the output level of the head unit to the rear channels of
the amplifier.
12. REAR SPEAKER OUTPUTS
After connecting the rear speaker wires, plug in the connector here.
BACK TO CONTENTS