Filter
Top Products
User gUide •
ITEM NO. IPPCMINI
Thank you for purchasing the DigiPower car charger for iPod and
iPhone. This product has been designed with 1A fast charging
capability, an electronic resettable fuse, and a LED power indicator;
all in an ultra compact size.
This package includes a 1 meter (3.3 ft) charge/sync dock cable
compatible with iPod and iPhone. This cable can be used to
connect your iPod or iPhone directly to your computer for charge
and sync operations or connect to the included car charger to
power your iPod or iPhone on the go.
USING THE WALL CHARGER
1. Plug the car charger directly into your car’s CLA (cigarette
lighter adapter) or auxiliary power port.
2. The white LED on the front of the charger will glow to
indicate it is receiving power from your car.
3. Plug the USB connector directly into the car charger and
plug the other end into you iPod or iPhone.
4. Your iPod or iPhone battery indicator should now show the
device is being charged. If it does not make sure the CLA
power indicator light is glowing and the cable is rmly
connected.
5. This charger will work with any other portable device that
charges via USB. It will require the specic charge cable for
that device.
TROUBLESHOOTING
If the fuse should trip, (LED goes o, device stops charging) unplug
the charger from the receptacle, make sure the receptacle is clean
of any debris, wait 10 seconds, then plug it back in.
If the charger still does not function check your car’s fuse box
to make sure that fuse is in working condition (consult your car
owner’s manual for location and type of replacement fuse).
TECHNICAL SPECIFICATIONS
Input voltage range 12 to 16VDC
Output voltage: 5V
Output Current: 1A
Over voltage protection
Short circuit protection
Fuse type, electronic resettable.
Includes 1 meter (3.3 ft) charge/sync cable for iPod and iPhone
LIMITED WARRANTY
Mizco’s responsibility with regard to this limited warranty shall
be limited solely to the repair or replacement at its option, of any
product, which fails during normal consumer use for a period of 1
Year from the date of purchase. This warranty does not extend to
damage or failure, which results from misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. If at any
time during the 1 Year period following the purchase the product
fails due to defects in materials or workmanship, return the
defective product with freight prepaid and proof of purchase.
All brands represented herein are registered trademarks of their
respective manufacturers. Design and specications are subject to
change without notice.
WARNING! IMPORTANT SAFETY INSTRUCTION!
Failure to read and follow these safety instructions could result in
re, explosion, electrical shock or other hazard, causing serious
and/or fatal injury and/or property damage.
• Do not modify, disassemble, open, drop, crush, puncture or
shred the product.
• Do not expose the product to rain or water.
• This product is not a toy. Keep away from children. Insure that
all persons who use the product read and follow these
warnings and instructions.
CAR CHARGER
| 1 | 2 | 3
EnglishUser Guide
1
Year Warranty
Garantía De Año
Garantie D'Un An
“Made for iPod” means that an electronic accessory has been designed to connect specically to
iPod and has been certied by the developer to meet Apple performance standards.
“Works with iPhone” means that an electronic accessory has been designed to connect specically to
iPhone and has been certied by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
All brands represented herein are registered trademarks of their respective manufacturers.
Todas las marcas representadas aquí son marcas comerciales registradas de sus fabricantes respectivos.
Toutes les marques représentées ici sont des marques déposées de leurs fabricants respectifs.
Declaración de conformidad con los reglamentos de la FCC para compatibilidad electromagnética
Nosotros, Mizco International, Inc., de 80 Essex Ave East, Avenel, NJ 07001, declaramos bajo nuestra responsabilidad única
que el producto IP-PCMINI relacionado con esta declaración, cumple con la Parte 15 de las reglas de la FCC. Su operación
está sujeta a las siguientes dos condiciones: (1) este dispositivo no puede causar interferencia dañina, y (2) este dispositivo
deberá aceptar cualquier interferencia recibida, incluyendo interferencia que pudiera causarle una operación no deseada.
Este equipo ha sido probado y se encontró que cumple con los límites establecidos para un dispositivo digital Clase B, de
conformidad con la sección 15 de las reglas de la FCC. Estos límites están diseñados para ofrecer una protección razonable
contra interferencia perjudicial cuando el equipo se opera en una instalación residencial. Este equipo genera, usa y puede
emitir energía de radio frecuencia y si no se instala y usa de acuerdo con las instrucciones podría provocar interferencia
perjudicial a las comunicaciones de radio. Sin embargo, no hay garantía de que dicha interferencia no ocurrirá en una
instalación en particular. Si este equipo ocasiona interferencia perjudicial a la recepción de radio o televisión, lo cual se
puede determinar apagando y encendiendo el equipo, se sugiere que el usuario trate de corregir la interferencia mediante
una de las siguientes medidas:
• Colocar u orientar la antena receptora en otro lado.
• Aumentar la separación entre el equipo y el receptor.
• Conectar el equipo una salida o circuito distinto al que está conectado el receptor.
• Consultar a su proveedor o un técnico de radio o televisión con experiencia para que le ayuden.
Mizco International, Inc. no es responsable por cualquier interferencia causada por modicaciones no autorizadas a este
equipo. Dichas modicaciones podría invalidar la autorización del usuario para operar este equipo.
ICES
Este aparato digital Clase B cumple con el ICES-003 de Canadá.
Déclaration de conformité à la réglementation FCC en matière de compatibilité électromagnétique
Nous, Mizco International, Inc., sis au 80 Essex Ave East, Avenel, NJ 07001, déclarons sous notre seule responsabilité
que le produit IP-PCMINI auquel se réfère la présente déclaration, est conforme aux normes énoncées à l’alinéa 15 de la
réglementation FCC. Le fonctionnement est assujetti aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer
d’interférence nuisible, et (2) cet appareil doit accepter toute interférence reçue, y compris des interférences pouvant
entraîner un fonctionnement non désiré.
Cet appareil a été contrôlé et jugé conforme aux limites imposées pour les unités numériques de classe B, en vertu de
l’alinéa 15 de la réglementation FCC. Ces limites visent à assurer une protection raisonnable contre les interférences
en milieu résidentiel. Cet appareil génère, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé et
utilisé selon les instructions fournies, il peut causer des interférences dans les communications radio. Néanmoins, aucune
installation n’est par dénition exempte de ce phénomène. Si cet appareil cause eectivement des interférences nuisibles
lors de la réception d’émissions radio ou télévisées (et il sut, pour s’en rendre compte, d’allumer et d’éteindre l’appareil),
l’utilisateur devra tenter de corriger ces interférences en prenant l’une des mesures suivantes:
• Réorienter ou changer la position de l’antenne réceptrice.
• Augmenter la distance entre l’équipement et le récepteur.
• Brancher l’équipement sur une prise de courant appartenant à un circuit diérent de celui sur lequel est branché le
récepteur.
• Demander l’assistance du fournisseur ou d’un technicien de télé ou de radio expérimenté.
Mizco International, Inc., n’est pas responsable des interférences causées par des modications non autorisées de cet
équipement. De telles modications peuvent rendre nulle l’autorisation accordée aux utilisateurs de se servir de cet
équipement.
ICES
Ce périphérique numérique de classe B est conforme à la norme canadienne ICES-003.
Declaration of Conformity with FCC Rules for Electromagnetic Compatibility
We, Mizco International, Inc., of 80 Essex Ave East, Avenel, NJ 07001, declare under our sole responsibility that the product
IP-PCMINI to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Mizco International, Inc., is not responsible for any interference caused by unauthorized modications to this equipment.
Such modications could void the user’s authority to operate this equipment.
ICES
This Class B digital apparatus complies with Canadian ICES-003.