Filter
Top Products
10
ENGLISH
6
ADVANCED CD PLAYBACK
• Using this function, you can search for a desired
point quickly with in a track in the both forward or
reverse direction.
• Release the SEARCH button (
6 or 7) !1 !2
when the desired point has been reached. Normal
playback then continues.
• When a SEARCH button (
6 or 7) !1 !2 is
pressed during the pause mode and the button is
released, the pause mode is set at that point with
the sound being output.
(3) Audible quick search
(Manual search)
2 Manual search forward
1. Press the SEARCH (
7) button !2 during
playback.
• Playback of the track is sped up.
2 Manual search in reverse
1. Press the SEARCH (
6) button !1 during
playback.
• Reverse playback of the track is sped up.
(4) Repeating playback of a desired
interval
(Single track repeat)
1. Set the play mode to the single play mode.
2. Press the REPEAT button !9.
• The “REPEAT 1” indicators light on the display
and the single track repeat mode is set.
(All track repeat)
1. Set the play mode to the continuous play mode.
2. Press the REPEAT button !9.
• The “REPEAT” indicators light on the display and
the all track repeat mode is set.
3. Press the PLAY (1) button y.
• The disc is played repeatedly.
• The all track repeat mode can also be set by
pressing the REPEAT button !9 during playback.
• If the REPEAT button !9 is pressed during
programmed playback, the tracks are played
repeatedly in the programmed order.
• To cancel the all track repeat mode, press the
REPEAT button !9 repeatedly until the
“REPEAT” indicator turns off.
1. Turn the select knob (
9) !0 clockwise during
playback.
• The pickup will advance to the beginning of the
next track and playback will continue.
Pressing the button several times will forward
the pickup to the corresponding number tracks.
(1) Advancing to the next track
during playback
(Automatic search)
1. Turn the select knob (8) !0 counterclockwise
during playback.
• The pickup will return to the beginning of the
current track and playback will continue.
Pressing the button several times will return the
pickup to the corresponding number tracks.
(2) Returning to the beginning of the
current track during playback
(Automatic search)
1. During playback, press the A-B button @3 at the
point where you want to start repeated playback (A
point).
• The “A-B” indicator flash on the display.
2. Press the A-B button @3 again at the point where
you want to end repeated playback (B point).
• The “A-B” indicator stops flashing (remaining lit),
and the A-B section begins playing repeatedly.
• If no B point it set, the end of the current track is
set as the B point when in the single mode, and
the end of the disc is set as the B point when in
the “continue” mode.
3. To cancel A-B repeat playback, press the A-B button
@3 again.
(5) To play the set section repeatedly
(A-B repeat)
NOTE:
• Set the A and B points at least 1 second apart
from each other.
• With this function, you can choose any of the tracks
on the disc and program them to play in any order.
• Up to 99 tracks can be programmed.
(6) Playing specific tracks in a specific
order
(Programmed play)
2 Inputting the program
1. Press the PROGRAM IN button !8.
• “PROG” indicator flashes, and “---Select?”
appears on the display.
2. Turn the select knob !0 to select the track.
3. Press the select knob !0 to enter the track.
• To enter the next track, press the select knob
!0 again.
• Repeat steps 2 and 3 to program the tracks in
the desired order.
4. Press the PROGRAM IN button !8 to exit the
program input mode.
• “PROG” indicator lights, and set the return to
the normal mode.
2 Changing the program
1. Press the PROGRAM IN button !8 to set the
program edit mode.
• “PROG” indicator flashes.
2. Turn the select knob !0 to select the program
step.
3. Press the select knob !0 to be edited.
4. Turn the select knob !0 to change the track.
5. Press the select knob !0 to enter the track.
• To edit the next track, press the select knob !0
again.
• Repeat steps 2, 3, 4, and 5 to change the
tracks.
6. Press the PROGRAM IN button !8 to exit the
program edit mode.
2 Inserting the program
1. Press the PROGRAM IN button !8 to set the
program edit mode.
• “PROG” indicator flashes.
2. Turn the select knob !0 to select the position at
which to insert a track.
3. Press the SEARCH (
7) button !2 to set the
program insert mode.
4. Turn the select knob !0 to insert the track.
5. Press the select knob !0 to enter the track.
• The track corresponding to that number is
inserted in the program before the track of
step 2.
• To insert more tracks, press the select knob !0
again.
• Repeat steps 2, 3, 4, and 5 to insert the tracks.
NOTE:
• Programming is not possible with the disc
holder open.
6. Press the PROGRAM IN button !8 to exit the
program edit mode.
2 Deleting the program
1. Press the PROGRAM IN button !8 to set the
program edit mode.
• “PROG” indicator flashes.
2. Turn the select knob !0 to select the position at
which to delete a track.
3. Press the SEARCH (6) button !1 to delete the
track.
• Repeat steps 2 and 3 to delete more tracks.
4. Press the PROGRAM IN button !8 to exit the
program edit mode.
2 Playing the programs
1. Press the PROG. PLAY button !7 to set the
program play mode.
• The program play mode LED is lit.
• The first track in the program is cued and the
standby mode is set.
2. Press the PLAY (
1) button y.
• Programmed playback starts.
2 Clearing the program
1. The program is also cleared when the
OPEN/CLOSE button e is pressed.
2 Presetting program
• Programs can be stored in the preset memory.
When a disc for which a program is preset is
loaded, the programmed playback mode is set
automatically.
• Programs can be stored for up to three discs.
1. Follow the instructions under “Programming” to
input the program.
2. Follow the instructions under “(2) Presetting
Procedure” to set the preset mode. (See Page
15.)
3. Turn the select knob !0 to select “02:Prg1”
(or “03:Prg2” or “04:Prg3”).
4. Press the select knob !0.
• The character display changes as follows :
[Before change] [After change]
Prg1 OFF ⇒ Prg1 ON
Prg2 OFF ⇒ Prg2 ON
Prg3 OFF ⇒ Prg3 ON
5. Press the STOP (
2) button u.
• The preset setting mode is canceled and the
set return to the normal mode.
• To play a preset disc :
Load a disc for which a program is preset.
6. Press the PLAY (
1) button y.
3. Use the select knob (8 and 9) !0 to select
the track to be played repeatedly.
4. Press the PLAY (1) button y.
• Playback starts.
• Once the selected track ends, it is played again
from the beginning.
• The single track repeat mode can also be set by
pressing the REPEAT button !9 during playback.
The current track is played repeatedly.
• To cancel the single track repeat mode, press
the REPEAT button !9 repeatedly until the
“REPEAT 1” indicator turns off.