Filter
Top Products
INTRODUCTION
Congratulations on your purchase of DCM Full Time Loudspeakers. Your new
speakers represent the latest technologies in loudspeaker design and manufac-
turing. They will provide outstanding performance and years of listening enjoy-
ment. Please take time to read through this manual thoroughly to insure you get
maximum performance out of your new loudspeakers.
FEATURES
• Video shielding for placement near a TV or monitor (FT6C)
• 19mm dome tweeter
• Internally braced high density MDF cabinets
• Nickel-plated 5-way binding posts
• Black ash finish to blend in with any decor
• DCM 10 year limited warranty
SPEAKER PLACEMENT
MAIN LEFT AND RIGHT CHANNELS
FT12, FT10, FT6
All DCM Full Time Loudspeakers have been engineered to combine deep power-
ful bass with crisp, natural high frequency performance. Because there are many
factors that affect loudspeaker performance, there is no universal rule for speaker
location. Best results will be obtained with some experimentation using the fol-
lowing guidelines.
To achieve the most realistic stereo image, position the speakers so that an
equilateral triangle is formed between the speakers and the listening position
(Figure 1). Turning the speakers slightly towards the listening position can
improve the image focus.
Bass loudness can be increased by moving the speakers closer to the rear wall.
This sometimes can degrade the stereo image. Use your judgement as to what
location best fits your preferences.
SURROUND LEFT AND RIGHT CHANNELS
FT6
If you are using the FT6 for rear channel speakers in a home theater application
they should be placed to the side and slightly behind the listening position (Figure
1). If this is not practical, they can be placed on the rear wall to either side of the
listening position (Figure 2). For best results, the surround speakers should be
spaced equal distances from the listening position with the tweeters at or above
ear level.
CARE AND MAINTENANCE
Your speakers are designed to work with a wide range of electronic components.
As little as 20 watts per channel can provide enough power for most applications.
If you have a large room or prefer louder listening levels, more power may be
required.
Caution: When choosing an amplifier, do not exceed the power
rating of the speaker. If you hear very high levels of audible dis-
tortion you are exceeding the capabilities of the system. Damage
can occur from this distortion, turn the volume back down until the
distortion disappears.
Use the following guidelines to maintain the appearance of your speakers. Use
a soft, damp cloth to clean the speaker cabinet. Avoid using harsh detergents or
cleaning fluids. Remove the grills to vacuum and remove dust. Do not vacuum
any of the speaker components, permanent damage could occur.
TECHNICAL ASSISTANCE
For additional technical assistance you can visit our web site at
www.dcmspeakers.com. Otherwise, our technical service representatives can be
reached by phone: 1-877-DCM-LOUD or by email: technical@dcmspeakers.com.
DCM WARRANTY INFORMATION
All FT12, FT10, FT6 and FT6C Speaker Cabinets purchased in the United States from
an authorized DCM dealer are guaranteed against defects in material and workman-
ship for a period ten years from the date purchased by the end user, and limited to the
original retail purchaser of the product.
DCM disclaims any liability for other incurred damages resulting from product defects.
Any expenses incurred in the removal and reinstallation of product is not covered by
this warranty. DCM's total liability will not exceed the purchase price of the product.
This warranty is valid in the United States only.
Proof of purchase is required when requesting service, so please retain your sales receipt
and take a moment to register your warranty on line @www.dcmspeakers.com.