Daewoo DCI-27 Clock Radio User Manual


 
2. IPHONE: In TUNER status, press FUNCTION key to switch over to IPHONE status. Then insert IPHONE/IPOD
unit to IPOD port and start to play IPHONE/IPOD music. (After the main unit is connected to power supply, you can
charge the IPOD/IPHONE in any state).
Pause Function: In IPHONE/IPOD Play or Pause status, press key once to pause playing. (Note: In
IPHONE/IPOD Play or Pause status, LCD won't display , and they only display on LCD of IPHONE/IPOD).
Up and Down Music Selection Function: In IPHONE/IPOD play or pause status, press / to call
out Previous Music/ Next Music.
Forward & Reward Function: In IPHONE/IPOD Play or Pause status, press / key for a longer time
to call out Forward & Reward Function.
IPHONE Incoming Caller Display Function: When there is an incoming call as IPHONE is playing
music, this unit will automatically switch over to caller ring tone and stop playing music.
3. AUX: In IPHONE status, press FUNCTION key to switch over to AUX status, just insert the external sound source
like MP3/CD, etc. into AUX port on the back of unit and start to enjoy the music inputted by AUX (please adjust the
volume of external sound source to the medium level and put it in PLAY status).
Volume Adjustment: Volume may be tuned up or down between 00 and 30.
Memory Function: Open the battery door on the back of unit and load Four AA batteries into the little
battery holder according to the positive and negative polarities.
NOTE: The battery is only for the backup of the clock and alarm function.
Clock Settings: In Standby status, press MEM/SET key for a longer time to enter into Clock Settings status,
then the clock will be displayed and numbers on LCD light will flash. HOUR figures on LCD start to flash, you can
press Previous Music/ Next Music key to adjust the hour; press MEM/SET key again, HOUR figures on LCD will be
displayed stably and MINUTE figures start to flash, you can press and keys to adjust the minute and finally press
MEM/SET key once to confirm the settings and exit from the clock status.
Alarm Clock Settings: Press POWER key to power off and enter into standby status, press SLEEP/AL key
for a longer time, and HOUR figures on LCD will flash; then Previous Music/Next Music key to adjust the HOUR,
press SLEEP/AL key once and HOUR figures on LCD will be displayed stably and MINUTE figures start to flash, you
can press Previous Music/ Next Music key to adjust the minute and finally press SLEEP/AL key once and the alarm
clock mode starts to flash, press and keys to set up the alarm clock mode as one of ring tone, radio, IPOD/
IPHONE modes and finally press SLEEP/AL key to complete the settings.
Snooze function: After the alarm clock has rung, press SNOOZE key to activate the snooze function.The
alarm ring will pause and will ring alarm nine minutes later. You can then press POWER key to stop the alarm bell and
not resume it.
Sleep Settings: In the play/ pause/ stop status of arbitrary function, press SLEEP key shortly on the unit to
set the sleep time as SLEEP120 / SLEEP90 / SLEEP60 / SLEEP30 / SLEEP15 / SLEEPOFF as you desire.
1716
ENEN