Filter
Top Products
PREPARATION FOR USE
Unpacking and Setup
•
•
•
Power Sources
This portable audio system is designed to operate on AC 120V~60Hz or by
using eight (8) "C" batteries, (batteries not included). Attempting to operate this
unit from any other power source may cause damage to the unit, which is not
covered by your warranty.
AC Operation
Unwind the AC cord and extend it to its full length. Insert the small end of the
AC cord into the AC power socket on the rear of the unit. Insert the other end of
the AC cord into any convenient AC 120V~60Hz household outlet.
Battery Installation
To use this unit with battery power, remove the battery compartment on the
bottom of the unit by sliding it towards the rear of the unit and lifting the battery
door off. Insert eight (8) "C" size batteries (batteries not included) following the
diagram in the compartment.
NOTE: The power cord must be disconnected from the AC power socket on the
rear of the unit in order for the unit to operate on battery power.
Carefully remove the unit from the display carton and remove all packing
material from the unit itself.
The detachable AC power cord is packed in the carton separately from the
unit. Make sure the AC power cord is not accidentally discarded with the
carton or packing material.
Press the CD Door OPEN/CLOSE area to open the CD compartment door.
There is a white card in the CD compartment which intended to prevent the
CD pickup from moving during shipment of the product. Remove this card
from the CD compartment before use.
2