Filter
Top Products
AM-This unit has a built-in ferrite rod antenna, which eliminates the need for an
external antenna, and provides adequate receipt in most areas. If reception is weak,
turn the unit to improve receipt.
RADIO OPERATION
ANTENNAS
FM- The telescopic antenna on the top of the unit is for FM reception only. If reception
is weak, adjust the length and the angle of the antenna.
LISTENING TO RADIO STATION
1. Set FUNCTION selector to (1) RADIO position.
2. Set BAND selector (6) to the AM or FM / FM ST. Position.
3. Tune a desired station by tuning the TUNING control(7).
4. Adjust VOLUME control (14) to suit your personal listening preference.
5. To switch the radio off, set the FUNCTION selector (1) to TAPE position.
CASSETTE TAPE OPERATION
TO PLAY CASSETTE
TO RECORD CASSETTE TAPE
1. Set Function selector (1) to Tape position.
2. Lift up the cassette knob, then press STOP/EJECT button to open the cassette compartment.
3. Insert a recorder cassette tape in the cassette compartment with exposed side facing up.
4. Press PLAY button to begin playback.
5. To stop the tape, press STOP/EJECT button.
6. To advance or rewind the tape rapidly, press the Fast Forward or Rewind
buttons. To resume normal playback press the Cassette Play button
7. To pause temporarily during playback, press the Cassette Pause button.
Press Pause again to cancel the pause mode and resume playback.
Your equipment is able to record your desired sound source either from compact disc
player or radio on a cassette tape.
1. Lift up the cassette knob cover, then press STOP/EJECT button to open the cassette compartment.
2. Insert blank cassette tape in the cassette compartment with exposed side facing up.
3. Depress PAUSE button.
4. Depress RECORD button.
5. Select your desired program by setting FUNCTION selector (1) and play the
program.
6. To start recording, press PAUSE button again.
7. To stop recording, press STOP/EJECT button.
* The recording level is automatically adjusted by built-in ALC circuit.
* The recording level is not affected by VOLUME (14) control, so you can listen to
the program with any volume.
CD OPERATION
CD DISPLAY
1. Track Indicator
2. Play/Pause Indicator
3. Repeat Indicator
4.CD-RW Indicator
- Shows the total number of tracks or the currently
player track.
- Lights when a disc is playing
- Flash when Pause to Play .
- Show Repeat all when Repeat to Play a Disc
- Flash when Repeat to Play a desire track.
- Lights when a Rewritable disc is playing
-7--6-
This unit is capable of playing standard CDs or 3 single discs: no adapter is required.
1. Set FUNCTION selector to CD position.
2. Pull the CD door to open the CD compartment.
3. Insert a CD disc to the CD compartment.
4. Close the CD compartment. The total number of tracks will be displayed and the CD
player will stop. If a disc is inserted incorrectly, dirty, damaged or not present at all,
the CD display will show - and the CD player will stop.
5. Press PLAY/PAUSE button to begin playback.
6. Press STOP button to stop.
7. Press : REPEAT button for repeat play.
PAUSE
This disc can be paused at any time during play by pressing the PLAY/PAUSE
button once. The PAUSE indicator will flash. Press the PLAY/PAUSE button
again to continue.
PLAYING A DISC
W
P
L
A
R
Y
/
B
R
-
A
C
D
C
K