Filter
Top Products
6
Setting the Clock and Date
1. Adjust the Power Switch to the off position.
2. Press the Mode Button twice to enter clock set mode.
3. First to select the Month by pressing the Set Button
4. Press Mode Button to confirm and select the Day by using the Set Button
5. Repeat the step to select Hour and Minutes
Playing an iPod
1. Connect an iPod to the Docking Station.
2. Adjust the Power Switch to the on position.
3. Adjust the Volume Switch to increase or decrease the volume of the unit.
4. Control the docked iPod using it’s native controls.
Connecting to an Audio Player using the Aux Input
1. Plug one end of a 3.5 mm Cable (not included) or a 3.5 mm - RCA Cable
(not included) into the AUX (Auxiliary) Input on the unit.
2. Plug the other end of the 3.5 mm Cable into the audio output/headphone
output on an Mp3 Player or Other Audio Source.
3. Set Power switch to the on position.
4. Remove any docked iPod’s from the Docking Station.
5. Audio played from the Mp3 Player or Other Audio Source will now be
heard on the unit.
NOTE: If connecting to the headphone output of an audio source, the source’s volume
controls may need to be adjusted for optimal sound
Control Definitions
1 Power Switch - Adjust the Power Switch to turn the unit off and on.
2 Set Button - Press the Set Button to set the clock.
3 Battery Compartment (Requires 4 x 1.5V UM-3 Batteries, not included)
4 DC Power Input - Connect the DC Power Input to a standard AC Outlet to
power the unit. (Requires an AC/DC adapter, included)
5 Aux Input -Use the Aux Input to connect an MP3 player or other audio source
to the unit.
6 Volume Switch - Adjust the Volume Switch to increase or decrease the volume
of the unit.
7 Mode Button - Press the Mode Button twice to enter clock set mode.