Continental Electric CEPD64381 Portable CD Player User Manual


 
This instrument has a built-in automatic stop and the tape mechanism will stop playing or
recording and shut off when it has reached the end of the tape.
MANUAL STOP
The tape player can be stopped manually by pressing the Cassette STOP/EJECT Button.
TO PLAY A CASSETTE TAPE
1. Open the Cassette Door by pressing the Cassette STOP/EJECT Button (in some
cases, you may have to press the Cassette STOP/EJECT Button twice since this
button has combined functions of stop and eject).
2. Insert the cassette, with the exposed tape facing downwards, into the tracks in the
Cassette Door - the full reel or spool must be on the right side.
3. Close the Cassette Door.
4. Check the position of the FUNCTION Switch to make sure it is in the TAPE
position.
5. Press the Cassette PLAY Button.
6. Adjust the VOLUME Control to your listening preference.
7. To stop the tape manually, press the Cassette STOP/EJECT Button.
8. To remove the cassette, press the Cassette STOP/EJECT Button again and the
Cassette Door will open.
CAUTION: SIDE A SIDE B
The automatic stopping mechanism may not operate during playback of tape
when set is using batteries if the batteries are weak.
Do not leave any tape buttons down when set is not in use, or else the pinch
roller could be damaged.
AUTOMATIC LEVEL CONTROL (ALC)
This set has the latest Automatic Level Control circuitry, therefore, it is not necessary to
adjust the VOLUME Control when recording. This circuit automatically records at the
correct level and prevents over loading.
NOTE: While recording you may adjust the VOLUME Control as you desire without
affecting the recording operation.
TO RECORD FROM THE BUILT-IN RADIO
7. Follow the instructions in TO PLAY THE RADIO (slide the FUNCTION Switch to
RADIO position).
8. Load the cassette tape into the Cassette compartment (full reel on the right side).
9. Tune into the station you want to record, press the Cassette RECORD button and
cassette PLAY button both at the same time. Both buttons should remain in their
depressed positions when released.
10. You are now recording from the Built-in Radio and the recording process will
automatically stop at the end of the tape.
11. To stop the recording manually, press the Cassette STOP/EJECT button.
12. When you want to play the cassette tape after recording, press Cassette REWIND
button, then press the Cassette PLAY button. Adjust the VOLUME control to
comfortable level.
TO RECORD FROM COMPACT DISC
1.Load the cassette tape into the Cassette Door (full reel on the right).
2.Load the compact disc and close the CD/Mp3 Door.
3.Set the FUNCTION Switch to CD/Mp3 position.
4.Press the Cassette PAUSE button for the cassette.
5.Press the Cassette RECORD and PLAY buttons for record stand-by.
NOTE: When pressing the Cassette RECORD button, the Cassette PLAY Button will
automatically go down. (If the buttons do not go down, reverse the tape or check
record lever interlock.)
6.Start the CD/Mp3 playing by pressing the CD/Mp3 PLAY/PAUSE ( ) button.
7.Press and release the Cassette PAUSE button when you wish to start recording.
8.Press the Cassette STOP/EJECT button to stop the recording.
9.To hear what you recorded, press the REWIND Button and then PLAY Button.
TO ERASE A TAPE
Simply record any new program, the old program will automatically be erased. If you
cannot press the Cassette RECORD Button, see RECORD LEVER INTERLOCK
information, or to see whether the tape may reach its end.
RECORD LEVER INTERLOCK
PROTECTING CASSETTE TAPE AGAINST ERASURE
All cassette tapes are provided with tabs which, when in place, allow tape erasure to be
performed. If the tabs are removed then the tape CANNOT be erased and the Cassette
RECORD Button cannot be depressed.
To protect the A (or 1) side of cassette tape, break off the A side tab with a screwdriver.
SCREWDRIVER Break the small tab to prevent
erasing or recording
Follow same procedure for B (or 2) side.
NOTE: Music tapes you buy from a store have these removed to prevent accidental
erasure.
The tape can be re-recorded or erased, if by covering the tab holes with plastic tape.
CÓMO GRABAR DE UN DISCO COMPACTO
1. Coloque la cinta de cassette dentro de la puerta de la casetera (con el carrete lleno con la
cinta a la derecha).
2.Coloque el disco compacto y cierre la puerta de CD.
3.Coloque el selector de FUNCIONES en la posición CD.
4.Presione el botón PAUSE (pausa) de la casetera.
5.Presione los botones RECORD (grabar) y PLAY (reproducir) para colocar la grabación en
espera.
NOTA: Cuando presione el botón RECORD (grabar) de la casetera, el botón PLAY (reproducir)
se bajará automáticamente. (Si los botones no bajan, déle vuelta al cassette o revise el seguro
(lengüeta) antigrabación del cassette).
6.Comience a reproducir el disco CD presionando el botón CD PLAY/PAUSE (gura) (reproducir
CD/pausa).
7.Presione y suelte el botón PAUSE (pausa) de la casetera cuando desee comenzar la gra-
bación.
8.Presione el botón STOP/EJECT (detener/eyectar) para detener la grabación.
9.Para escuchar lo que se ha grabado presione REWIND (rebobinar) y luego PLAY (reproducir).
CÓMO BORRAR LA CINTA DE CASSETTE
Simplemente grabe algo nuevo. Lo grabado anteriormente se borrará automáticamente. Si no se
puede presionar el botón RECORD (grabar), vea la información sobre el SEGURO ANTIGRA-
BACIÓN, o verique que la cinta no haya llegado a su n.
SEGURO ANTIGRABACIÓN
CÓMO PROTEGER UN CASSETTE PARA QUE NO SEA BOR-
RADO.
Todas las cintas de cassette cuentan con lengüetas o pequeñas placas, que cuando están en su
lugar, permiten que se pueda borrar la cinta. Si se retiran estas lengüetas, la cinta NO PUEDE
ser borrada y no se puede presionar el botón RECORD (grabar) de la casetera.
Para proteger el lado A (ó 1) de la cinta de cassette, rompa y retire la lengüeta del lado A con un
destornillador.
DESTORNILLADOR Rompa la lengüeta o pequeña placa para
evitar el borrado o grabación.
Siga el mismo procedimiento para el lado B (ó 2).
NOTA: Los cassettes de música que se compran de una tienda ya vienen sin las lengüetas para
prevenir que sean borrados accidentalmente.
Se puede regrabar o borrar la cinta si se cubre los hoyos donde estaban las lengüetas con cinta
de plástico.