Filter
Top Products
COMPAQ IPAQ PM-1 11
While the disc is being read, “TOC Reading” is displayed on the remote control’s LCD. “TOC” refers to
the “Table of Contents.”
The TOC reading time depends on the type of disc loaded in the player. It takes the player one-half to
one second to read a single directory on an MP3 disc.
When the player is finished reading the TOC, playback begins automatically. “MP3” is displayed on the
remote control’s LCD if the loaded disc contains MP3 files. “CD” and “CDA” are displayed if the
loaded disc is in a CD-DA format.
If there is no disc loaded in the player, “NO DISC” is displayed on the remote control’s LCD.
Switching to Power Off (Stand-By) Mode
The PM-1 goes into stand-by mode to save power in the following circumstances:
> When the STOP button is pressed for 3 seconds.
> When no button is pressed for 30 seconds while the player is in STOP mode.
> When no button is pressed for 30 seconds while the player’s cover is open.
When the player goes into stand-by mode, the LCD display goes off and the power is down. “Power Off”
is displayed on the LCD before the power goes off.
Playing a Track
Press the PLAY/PAUSE button to begin playback whenever the PM-1 is in Stop mode, Pause mode, or
Stand-by mode.
While the PM-1 is playing a track, press the PLAY/PAUSE button to toggle between the Play and Pause
modes.
Stopping Play
When the PM-1 is in Play mode or Pause mode, press the STOP button once to stop play.