Filter
Top Products
Page 10 Coby Electronics Corporation
www.cobyusa.com Page 11
English
Alarm Mode
To set the alarm type:
Press and hold the MODE pad until the display 1.
ashes the current alarm type (iPod, FM, AM or BEEP).
Press the MODE pad until you have reached the 2.
desired alarm type. Wait for the display indicator to
stop ashing, indicating that the alarm type is set.
You may also select the alarm type by pressing the
ALARM MODE button on your remote control.
Once you have set an alarm, the Alarm Signal
Format indicator will illuminate along with the
audio mode when the speaker system is in use.
(E.g. When alarm is set to RADIO type and system
is playing iPod audio, both the iPod and RADIO
logos will display on screen.)
To activate the alarm
Once your alarms are set, they can be activated in any
combination (ALARM only, ALARM only, or ALARM &
). To activate the alarms:
Press the SET pad on the system, or the ALARM key
on the remote control. The screen will display the
ALARM time for three seconds. The ‘A’ symbol will
continue to display, indicating that ALARM has been
selected.
To select ALARM or ALARM & , press the SET pad
until the display indicates that the desired alarm is
selected.