Filter
Top Products
Full clockwise rotation closes the gate
allowing only very strong signals to enter.
Full counterclockwise rotation opens the
“gate”allowing all signals in.
To achieve the Desired Squelch Setting (DSS),
turn the Squelch control counterclockwise
until you hear noise. Now turn the control
clockwise just until the noise stops. This is the
DSS setting.
Dimmer Switch
Setting Squelch
Squelch is the “control gate”for incoming signals.
19
Dimmer Switch
18
Operation
Operation
1
2
1
3
Rotate the Dimmer knob clockwise for maxi-
mum brightness;counter-clockwise for minimum.
CH9
HI
NOR
MIN MAX
DYNAMIKE
RFGAIN
TONE
29 NW ST
R
DIMMER
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS
GATE CLOSED
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS
GATE
OPEN
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS
NOISE
WEAK SIGNALS
MEDIUM SIGNALS
STRONG SIGNALS
GATE
Gate open
Gate set to Desired
Squelch Setting (DSS)
Gate closed
DIMMER
HI
NOR
MIN MA
29 NW ST
TONE
DIMMER
HI
NOR
MIN MA
29 NW ST
TONE
Setting Squelch
DIMMER
HI
NOR
MIN M
29 NW ST
TONE
Note
The Dimmer controls the
brightness of the front panel,
signal strength meter and
channel display.