Filter
Top Products
STAND INSTALLATION
1. Choose a flat surface to install the TVS4091 stand.
2. Use the two supplied 1” screws to securely attach the stand to the mounting
surface.
3. Fold the handle of the TVS4091 to the downward position. Slide the unit
into the mounted stand.
TROUBLESHOOTING
Problem:
No Picture.
Solution:
• The power cord may not be connected properly. Check it.
• The batteries may need to be replaced. Check them.
• The external fuse may be burned out. Check the fuse.
Problem:
Picture too dark or too bright.
Solution:
• The brightness control may not be set properly. Adjust the brightness
control.
• The viewing angle may not be properly adjusted. Adjust viewing angle.
6