Filter
Top Products
2
Model LCR625
Installation:
h
h
h
h
h
Use the included template to mark and cut a hole in the
drywall.
We recommend wiring with AWG 16 or larger, stranded
wire.
For proper phasing, all speakers in the system must be
wired alike. Connect red wires to red terminals on
speaker and to red or plus terminals on amplifier.
Install LCR625 in hole. Tighten the mounting screws. The
mounting dog ears will rotate outward and grip the
drywall.
Aim tweeter
Mounting screws (6)
3
Specifications:
Frequency range:
Sensitivity:
Power Handling:
Drivers:
Impedance:
Finish:
Dimensions:
Weight:
40Hz - 20kHz ± 3dB
90dB (1W/1m)
150-Watts Peak
1- 1” silk soft dome tweeter
2- 6.5” polypropylene woofer
8 ohms
ABS plastic
8.94”H x 20.3”W x 3.7”D
(Depth is from surface of wall board)
12 Lbs as shipped
Specifications subject to change without notice.
Features:
High power handling capacity
Dual 6.5” polypropylene woofers with butyl rubber surrounds
1” pivoting soft dome tweeter
Gold speaker terminals
Small perforated designer grille
Mounting template and paint shield included
Recommended power: 20W to 150W