Filter
Top Products
10
Visit us online at califone.com
Cassette Function continued
CD Function continued
To search forward or backward to a particular point on a track during playback
Press and hold the (SKIP|) or (SKIP |) buttons to search forward or backward through the current track.
Playback resumes at the point you release the button.
Program Playback
Up to 20 tracks can be programmed for playback. To program a song sequence:
1. Press STOP rst if the CD is playing.
2. Press the PROGRAM button. The CD display will show P:01
3. Press the (SKIP>>) and or (SKIP<<) buttons to select the rst track to program.
4. Once the desired track is reached, press the PROGRAM button to enter the track number into memory.
5. Repeat steps 3 & 4 to program additional tracks.
6. Press the PLAY/PAUSE button to start programmed playback.
Note: The program will be erased when you press the CD PROGRAM button.
Repeat CD Selections
Repeat one or all programmed selections using the CD REPEAT button. Push the button once to replay any single selection. Push the
button twice to replay all programmed selections (in programmed order). Push
the button three times to clear the REPEAT function. “REPEAT ONE” or “REPEAT ALL” will appear on the CD PROGRAM DISPLAY when the
CD REPEAT button is pushed.
Dual Cassette Operation
The 2395IR features a cassette for playback and recording from radio, CD, cassette and microphone. The dual cassette decks
oer playback, continuous playback (Deck B to Deck A) and recording from tape, radio, microphone or CD on Deck A only.
Loading a Tape
To load a cassette tape, press the STOP/EJECT button (34) on Tape A or (35) on Tape B to open the cassette door. Insert tape with
playing side label facing you. Close the cassette door to lock the tape in position. Note: While Deck A is in playback mode, Deck B
must be stopped and not in PLAY or PAUSE mode for Deck A to playback.
Tape Playback
To play a loaded cassette tape:
1. Set FUNCTION button to TAPE
2. Press PLAY Deck A or B (38) (39)
3. Adjust VOLUME (7) (8)
4. Adjust TREBLE and BASS controls (9) (10) (11) (12)
To Stop Playback
Press the STOP/EJECT key (34) (35).
To Pause Playback
Press the PAUSE key (40) (41) all the way down to lock. To resume play, press the PAUSE key again, and release.
continued page 10
To Fast Wind/Rewind
Press the REWIND (42) (43) or FAST-FORWARD (44) (45) key. Press the STOP/EJECT key to stop winding at the desired position.
During fast winding, regular play, or recording, the tape will stop automatically when its end is reached.
Continuous Play from one cassette deck to the other cassette deck
1. Set the FUNCTION selector to TAPE.
2. Load prerecorded cassettes into Deck A and Deck B.
3. Press the PLAY button on Deck B.
4. Press the PAUSE and PLAY buttons on Deck A.
5. Adjust the Volume and Tone controls.
6. When the tape in Deck B reaches its end, it will automatically stop and the tape in Deck A will begin playing automatically.
To Record from Microphone, Tape, Radio or CD
This unit has an ALC (Automatic Level Control) circuit and no further adjustment of the Volume control is
necessary while recording. Set the FUNCTION Selector to:
• TAPE (4) to record from microphone. Plug mic into jack (29) or (30)
• AM/FM (5) to record from radio
• CD (6) to record from CD
1. Insert a blank tape into cassette Deck A.
2. Press the PAUSE button then the RECORD button on Deck A to prepare for recording. As the RECORD button is pressed
the PLAY button will follow.
3. Press PAUSE again to start recording.
Recording from Tape B to Tape A
1. Insert a blank tape into cassette Deck A, and the source or prerecorded tape into Deck B.
2. Press the PAUSE button then the RECORD button on Deck A to prepare for recording. As the RECORD key is
pressed the PLAY button will follow.
3. Press the PLAY button on Deck B, the PAUSE button on Deck A will release automatically and recording will begin.
Note: Every new cassette tape has erase prevention tabs. Commercially prerecorded tapes
have the tabs removed to prevent recording over the original material or accidental erasure.
Cover the openings with adhesive tape if you wish to record over such cassette tape.
To Stop Recording
Press the STOP/EJECT button on Deck B or press the PAUSE key on Deck A to momentarily stop recording.
Cueing with the Tape A Counter (46)
Rewind the tape to the beginning. Press the RESET button to reset the counter to (000). Use the Tape A Counter Display to
note precise points on an audio tape during playback and to cue the tape to those precise points using the Fast-Forward/Cue
or Rewind/Review buttons.
continued page 11
Cassette Function
califone_2395IR_manual.indd 13 9/14/07 4:34:46 PM