Filter
Top Products
9
Visit us online at califone.com
CD Function continued
CD Function continued
To interrupt the play, press the PLAY/PAUSE button (19). The Album No., track no. and played time will show on the LCD display as:
3. To resume the play, press the PLAY/PAUSE (19) again.
4. To select a desired Album press the ”ALBUM PRESET“ p(11) or the “ALBUM PRESET” q (12) repeatedly until the desired
Album appears on the display
5. To select a desired track, press uu| ((20) or |tt (21) button repeatedly until the desired track appears on the display.
6. To fast search for a particular passage during playing, press and hold the uu| (20) or |tt (21) button and release it
when the desired passage is located.
7. To end the play, press the STOP (23).
Program Play of CD
Up to 10 tracks on a disc can be programmed for play in any desired order.
- First select the CD/MP3 mode and load a disc that you want to program.
- The tracks must be programmed in the stop mode.
- The same track can be programmed more than once.
1. In stop mode, press the PROGRAM (17) ”00P -- 01” will be displayed.
2. Select a desired track which will be shown on the display by pressing the (20) and (21).
3. Press the PROGRAM (17 ) to store the selected track. ”PROGRAM“ and ”00 P -- 02“ will be shown on the display.
4. Repeat steps 2-3 to select and store other desired tracks.
5. Press the PLAY/PAUSE (to start programmed playing from the PROGRAM 01 track. The track number of the rst programmed
track, PROGRAM and the elapsed playing time will be shown on the display.
6. To end the programmed play, press the STOP button (23).
continued page 10
001 00:10
07 ESP
Playing
Track No.
Album Number
Played Time
000 P __01
00 ESP
califone_2385_manual.indd 12 9/6/07 9:23:05 AM