Filter
Top Products
6
Visit us online at califone.com Visit us online at califone.com
Handling Compact Discs Cassette Deck Operation
Califone recommends the use of C-60 tapes. Tapes longer than this are thinner and are
more prone to breakage or jamming the internal mechanisms.
Cassette Playback
• Set the Function switch to TAPE.
• Press STOP/EJECT to open the cassette holder.
• Insert a recorded cassette.
• Adjust the sound using the VOLUME and DBBS controls.
• Press P L AY and playback will start.
• Playback stops when the tape in the deck reaches the end.
• For brief interruptions, press PAUSE.
• To restart playback, press this button once more.
• To stop, press STOP/EJECT.
• When the end of the tape is reached the P L AY button is released.
• The set will be switched o if the Function switch is in TAPE position and no buttons are pressed.
Cassette Recording from the built-in mic
Cassette recordings are ideal for creating permanent records of a group project or student progress with the built-in microphone.
• Set the function switch to “Tape”
• Press STOP/EJECT to open the cassette holder.
• Insert a blank cassette.
• Start recording by pressing RECORD (the P L AY button is automatically pressed).
• When the end of the tape is reached, the recorder buttons are released.
• To interrupt recording, press PAUSE.
• To continue recording, press PAUSE again.
• Press STOP/EJECT if you want to stop recording before the end of the tape. When pressed again, the cassette holder will open.
• The set is switched o if the Function switch is in position TAPE and no buttons are pressed.
Recording from the CD-player
• Insert a blank or pre-recorded tape into the cassette compartment.
• Set the Function switch to CD.
• Start recording by pressing RECORD of the cassette deck (the P L AY button is automatically also pressed).
• Press PLAY/PAUSE of CD control to desired play track or from the beginning of the programmed selection.
• As soon as the desired passage is reached, pause the CD and then start recording by pressing RECORD.
Recording from the Radio
• Insert a blank or pre-recorded tape into the cassette compartment.
• Set the Function selector to RADIO.
• Select the wave band using the BAND SELECT switch.
• Tune to desired radio station using the TUNING control.
• Start recording by pressing record of cassette deck.