Filter
Top Products
8
Operating Your Wave
®
Radio ,,
Svenska Nederlands Italiano Français Español Deutsch Dansk EnglishDanskDeutschItalianoNederlandsSvenska Français Español English
Reading the display
Clock time in 12-hour (AM/PM)
time or 24-hour (Military) format
Displays operating information for the active
source or the setup menu.
Alarm time appears when alarm is
set.
SLEEP appears when the sleep
timer is activated.
FM, AM, AUX, or Bose
®
link
appears for the selected source.
Turning the Wave
®
radio ,, on and off
On
Off
Press On/Off once to turn the Wave
®
radio ,, on or off. The Wave
®
radio ,, turns on to the last
source played.
OR
AUX
Press any source button to turn the Wave
®
radio ,, on to that source. Pressing the AUX does
not turn on an auxiliary source (such as your TV), so turn that on first.
Controlling the volume
Mute
Press and hold Volume or to adjust the volume level. VOLUME - 0 (silent) to 99
(loud) appears on the display to indicate the level.
Press Mute to silence the Wave
®
radio ,,. Press Mute again, or press Volume to unmute.
To lower the volume before unmuting, press Volume
while muted.
Note:
When the Wave
®
radio ,, is off, the volume can only be adjusted between 10 and 75.
Setting up automatic shutoff (Sleep)
Sleep
Press Sleep to set the Wave
®
radio ,, to shut off automatically after a selected period of time.
• After pressing Sleep, SLEEP - 30 MIN appears on the display and the sleep timer
begins counting down. If your Wave
®
radio ,, is off, press Sleep to turn it on and
immediately set the sleep time. The last source selected will start playing as the sleep
timer counts down.
• While the SLEEP setting is displayed, press Sleep again to set the sleep timer to
10-90 minutes (in 10-minute increments) or OFF.
Note:
While in sleep timer setup mode, if more than 10 seconds elapses between button
presses, the Wave
®
radio ,, will automatically exit the sleep timer setup mode.
• To review the remaining sleep time, press Sleep.
• To cancel the sleep timer, press On/Off.