Filter
Top Products
4
SOUNDDOCK
®
SERIES III DIGITAL MUSIC SYSTEM
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
Using another audio device
You can play another audio device by connecting it to the
system. This requires a cable with a 3.5mm mini plug at one
end (not provided).
1. Set the audio device to slightly below full volume, then
plug it into the AUDIO INPUT connector.
2. If your iPod or iPhone is in the system dock and charging,
press and hold the Play/Pause button for three seconds to
switch to the other device.
3. Adjust the volume using the SoundDock III system remote
or the volume controls on the device.
Other buttons on the remote do not control this other
device. To return to listening to your iPod or iPhone, press
the Play/Pause button once.
Maintaining the system
Changing the remote control battery is the only regular
maintenance that is required. You may also clean the system.
Replacing the remote battery
When the remote stops operating or its range seems
reduced, it is time to change the remote battery.
1. Using a coin, turn the battery cover
slightly counterclockwise.
2. Remove the cover and insert the
new battery (CR2032 or DL2032)
flat side up, with the + symbol in
view.
3. Reseat the cover and turn it
clockwise to lock into place.