Filter
Top Products
5
TAB 5, 13TAB 4, 12 TAB 6, 14 TAB 8, 16TAB 7, 15English TAB 3, 11TAB 2, 10
OPERATION
System status lights
The status lights on the SoundLink™ speaker front panel
indicate source selection and battery condition.
Using the USB key
The USB key will automatically connect your computer
with the SoundLink speaker whenever you insert it into a
USB port.
AUX
AUDIO IN source (page 7)
Off: .....AUX source not selected
On: .....AUX source is selected
Wireless source
Off: ................... No wireless connection
Fast flashing: ... Wireless source is
connecting
On: ................... Wireless source is
connected
Brief flash: ........ Wireless source is
(every 3 sec) selected, but discon-
nected at the computer
Battery
• Indicates battery level during
portable operation. See “Operating
on battery power” on page 8.
• Indicates battery charging status.
See “Charging the battery” on
page 9.
Note: Each button pressed on
the remote causes the light for
the selected source to blink.
Disconnect-reconnect button
Press to disconnect or reconnect the
SoundLink speaker
Power light
Off: .......................USB key is not powered
Slow flashing: ......Powered and available for connecting
to the SoundLink speaker
Fast flashing:........Establishing a connection
On:........................Connected to the SoundLink speaker
PharosOG.book Page 5 Thursday, May 21, 2009 10:09 AM