Blaupunkt Miami CD72 Portable Radio User Manual


 
61
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
External audio sources
In addition to the CD changer, you can
also connect another external audio
source equipped with a line output. The
audio source can, for example, be a
portable CD player, MiniDisc player or
MP3 player.
The AUX input must be activated in the
setup menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from a
Blaupunkt dealer.
Switching the AUX input on/off
Press the MENU button 8.
Press the softkey 4 assigned to
the SETP display item.
Press the softkey 4 assigned to
the AUX1 or AUX2 display item
for the input that you want to switch
on/off.
The AUX menu is displayed.
Note:
If a CD changer is connected, you can-
not change the AUX1 input.
Press the softkey 4 assigned to
the ON or OFF display item to
switch the input on/off.
Note:
If the AUX input is switched on it can be
selected by pressing the SOURCE but-
ton ;.
EXTERNAL AUDIO SOURCES
SPECIFICATIONS
Specifications
Amplifier
Output power: 4 x 26 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 50 watts max.
power
Tuner
Wavebands:
FM : 87.5 108 MHz
MW : 531 1,602 kHz
LW : 153 279 kHz
FM frequency response:
30 - 16,000 Hz
CD
Frequency response:
15 - 20,000 Hz
Pre-amp out
4 channels: 4 V / 10 k
AUX input
Input sensitivity: 1.2 V / 10 k
Subject to changes!