Beacon Computer Phoenix Pink Portable Speaker User Manual


 
CHARGING
AND POWER:
The
Phoenix
should take approximately
2-3
hours
to
charge and has a
battery life
of
5-7
hours depending on volume playback levels
The
Phoenix does operate and play while plugged in and charging.
TO
CHARGE:
'
1. The included
USB
cable has 2 sides - a large standard plug, and a
mini USB plug.
2.
Plug the Mini
USB
plug into the socket
on
the
back
of
the
Phoenix.
3.
Plug the other end
of
the
cable into a
computer
or
any power
adapter with a
USB
port. (sold separately)
4. During charging, the light status ring
will
glow
red. When charging is
complete the light will
turn off.
"'
NOTE:
The
USB
cable
is
used for
ch_cfrging
only-
not
for any data transfer
BATIERIES:
The
Phoenix
contains a built in, ultra-portable
850
mA
Lithium battery.
Please
use caution and consult local authorities before disposing
of
this unit.
BASIC OPERATION:
Turn
On: Press
and hold the
POWER
button
for
about 5 seconds
until the light status ring turns blue
Turn
Off:
Press
and hold the
POWER
button
for
about 5 seconds
until the light status ring turns red
Enter Pairing Mode:
Press
and hold the POWER
button
for
about 1
0
seconds until
the
light
status ring flashes quickly.
Volume
Up
I
Down:
Press
and hold the volume buttons.
lhe
Phoenix
will chirp once either the highest
or
lowest setting has been reached.
(Volume can be affected by the volume output
of
your phone
or
music
player)
Changing
Track
I
Skipping
Songs: Press
the track buttons once.
(Function only works when in
~luetooth
connection mode)
~~
Pause
I
Play:
Press
the
PLAY outton once
NOTE:
There are
only
3
buttons
on
the
top
button
panel
of
the Phoenix. The
Volume
and
Track
buttons
are
the
same,
an
_d the
POWER
and
PLAY
buttons
are
the same. When pressing the
button
once,
you
will
get
a different function
that
when
you
press
and
hold
the button.