Filter
Top Products
2
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
3
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance. Loudspeaker in free air.
4
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance. Loudspeaker in free air.
7
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
8
12 dB/oct. or higher slope high-pass filter.