Filter
Top Products
Crossover
Model XO-5
Filter Type Two way
Nominal Impedance 8 Ohm
Crossover Frequency 1.5 kHz
Slope 12 dB/oct. (Low)
12 db/oct. (High)
Overall Dimensions 117x105 mm (4.6x4.1 in)
Weight 0.6 kg (1.3 lb)
1
Included by –6 dB down points, averaged from 1 kHz to 8 kHz with B&C
XO-5 crossover filter.
2
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
3
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance. Loudspeaker in free air.
4
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance. Loudspeaker in free air.
7
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
8
12 dB/oct. or higher slope high-pass filter.