2. ON THE SEAT BACK (Refer to Figure 8)
a. Hang the bag onto the seat back by looping the shoulder strap
of the bag around the headrest of the seat.
b. Take one of the supplied straps from the storage bag, and con-
nect the latch to the lower metal ring on the left side of the
mounting bag. Attach the "S" hook to the same ring after loop-
ing the strap around the seat rail. Repeat this process for the
right side. In some vehicles, it may be necessary to attach the
"S" connector to the rail directly, as it may not be long enough
to reach back to the ring.
c. Adjust the straps tightly so that the mounting bag is secured.
d. Swing the monitor upwards and adjust the screen for the
desired viewing angle.
8
Figure 7