Filter
Top Products
128-6745
16 of 31
-16-
Wired Headphones
There are two 1/8” headphone jacks on the PROV916/PROV916 S/PROV916 P that can be used with any standard
wired stereo headphones. These jacks are controlled by the volume up / down buttons on the PROV916/PROV916 S/
PROV916 P remote control.
Wired FM Modulator
The PROV916/PROV916 S/PROV916 P is equipped with an RF modulator, that allows you to listen to the PROV916/
PROV916 S/PROV916 P audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5,
89.9, 90.3MHz). This feature is accessed by using either the FM transmitter buttons on the remote (On/Off, Source
Select, Channel Select) or the FM Select button on the unit. Whenever the RF modulator is on, broadcast reception
on the vehicles radio will be poor. Switching off the FM modulator will allow normal radio reception.
AV1 Input
The video inputs may be connected to a Video cassette Player (VCP), video game system, or other audio / video
devices. To access the A/V inputs, turn the PROV916/PROV916 S/PROV916 P on and press the source button on
the PROV916/PROV916 S/PROV916 P or the Source button on the remote control until “AV1” is displayed on the
screen. Turn the video source component on with its power button or remote control. The PROV916/PROV916 S/
PROV916 P is now ready to play the audio and video signals from the source connected to AV1 input.
AUX A/V Input
The PROV916/PROV916 S/PROV916 P will accept an audio/video input through the RCA jacks located on the side of
the unit. The audio / video device could be a video game system, video camera, or other input device.
Video Out
The PROV916/PROV916 S/PROV916 P provides a video output for an optional video monitor(s). (Refer to page 6 of
the Installation Guide for more details.) This output will provide a video signal that duplicates the signal displayed by
the PROV916/PROV916 S/PROV916 P to an additional monitor or video display. Please see your installer for more
information.