Filter
Top Products
38
Before Calling Service Personnel
Check the following guide for the possible cause of a problem
before contacting service.
SYMPTOMS AND CORRECTION
Symptom
No power
No picture
No sound
The playback
picture has
occasional distortion
Brightness is unstable
or noises are produced
on playback pictures
The DVD video player
does not start playback
Cause
• The power plug is dis-
connected
• The TV is not set to
receive DVD output
• The video cable is not
connected securely
• The equipment con-
nected with the audio
cable is not set to
receive DVD signal out-
put.
• The audio cables are
not connected securely.
• Power to the equip-
ment connected with the
audio cable is turned off.
• The setting of output
sound type is not cor-
rect.
• The disc is dirty.
• It is in fast forward
reverse playback.
• The copy protection’s
effect.
• No disc is inserted.
Correction
• Connect the power plug into the
power port securely.
• Select the appropriate video
input mode on the TV so the pic-
ture from the DVD video player
appears on the TV screen.
• Connect the video cable into the
jacks securely.
• Select the correct input mode of
the audio receiver so you can lis-
ten to the sound from the DVD
video player.
• Connect the audio cable into the
jacks securely.
• Turn on the equipment connect-
ed with the audio cable.
• Set the audio setting correctly.
• Eject the disc and clean it.
• Sometimes a small amount of
picture distortion may appear.
This is not a malfunction.
• Connect the DVD video player to
the TV directly.