Filter
Top Products
With Screw (x6)
16
18
17
Adjust match your vehicle
seatback dimension
9
1) Read the manuals and get familiar with the electrical requirements and
connections.
2) Prepare the vehicle by removing any interior trim necessary to gain access to the
vehicle's wiring as well as all areas where interconnecting wire harnesses will be
located. (Refer to the Installation Procedure). The mounting method, and the
location will vary from vehicle to vehicle, so this manual will only focus for the
installation of the MMD7HRPKG Master and Satellite Monitors in the supplied
configuration. The best location for the MMD7HRPKG components is:
a. Monitors: (NOTE: The MMD7HRM Monitor should be installed where the
passenger usually sits behind the front passenger seat.
b. Audio Interface Box: Under either seat where monitors are located.
VEHICLE PREPARATION:
Move the locking tab to right position
to fully insert the monitor into the headrest
19