Filter
Top Products
33
Installing the Battery Pack:
1. First, make sure the player is off and that the AC power supply has
been disconnected.
2. Close the player cover.
3. Align the battery pack pins with the holes on the rear of the unit.
4. Push the battery towards the rear of player until it locks into position.
The lock position is indicated by a click. The unit will fit snugly to the
player.
5. Push the battery plug into the DVD player DC input jack.
Figure 47. Installing the Battery
Removing the Battery Pack:
1. First, make sure the player is off and the battery plug has been discon-
nected.
2. Press the release button on the left of battery and pull the battery
from the back of the unit at the same time.
Figure 48. Removing the Battery