Filter
Top Products
29
control and the brightness control on the monitor for individual
preference.
Figure 43
8. Connecting to a TV or another monitor ( Refer to Figure 38)
You can also connect the DVD player to a TV to enjoy high quality
stereo sound or another monitor.
1. Slide the AV in/out switch to the “out” position.
2. Connect one end of the audio/video cable’s black (1/8” stereo
plug) plug into the unit’s DVD AUDIO OUT jack, and connect
the other end to the AUDIO INPUT jacks on your TV or Monitor
(white = left channel, red = right channel).
3. Connect the audio/video cable’s yellow plug into the VIDEO
OUT jack on the side of the unit, and the other yellow plug to
the VIDEO INPUT jack on your TV or Monitor.
9. Connecting Coaxial Output
The coaxial output of the unit can be used with an optional cable that
has a stereo 1/8 inch male connector and a male RCA connector. The
output of cable can be aplied to any device which accepts a digital
coaxial signal.