Filter
Top Products
CR-308
PRECAUTION
Follow the advice below for safe and appropriate operation.
ON PLACEMENT
• Do not use the unit in places which are extremely hot, cold, dusty, or
humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow through the ventilation slots by placing the
unit on soft furnishings, by covering the unit with a piece of cloth or by
placing the unit on a carpet.
ON AC VOLTAGE
• Before using, check that the rated voltage of your unit matches your
local voltage.
ON SAFETY
• When connecting and disconnecting the AC cord, grip the plug instead
of the cord itself. Pulling the cord may damage it and create hazard.
• When you are not going to use the unit for a long period of time,
disconnect the AC power cord.
FCC INFORMATION (FOR USA ONLY)
This device complies with Part 15 of FCC Rules.
Operations are subject to the following two conditions:
(1) This device may not causeharmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesirable operations.
Should any trouble occur, disconnect the AC power cord and
refer servicing to qualified personnel.
LOCATION O F CONTROLS
2 4
3
1. Connect AC power, the clock digital will
indicate on screen.
• Check that the rated voltage of your
unit matches your local voltage.
2. Press “SET/MEMORY” knob, the clock
digital will flash.
3. Press “ H...TIME SET...M/TUNING ”
knob to adjust the Hour/Minute.
• When “ ” appears, it comes to set
noontime.
4. Press “ MEMORY ” knob to store.
CLOCK SETTING
DIGITAL CLOCK RADIO
OPERATION INSTRUCTION
EXPLANATION OF GRAPHICAL SYMBOLS:
WARNING
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
The lightning flash with an
arrowhead symbol, within the
equilateral triangle, is intended to
alert the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute an electric shock to
persons.
The exclamation point within the
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
"WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL."
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1. SET/MEMORY Knob
2. POWER (ON/OFF) Knob
3. BAND Knob
4. SNOOZE Knob
5. BUZZER/RADIO Switch
6. PRESET (+) Knob
7. PRESET (-) Knob
8. DISPLAY
9. COLORS Knob
10. ALARM2 Knob
11. H...TIME SET...M
(Hour/Minute)
/TUNING Control
12. SLEEP Knob
13. DIMMER Knob
14. ALARM1 Knob
15. RESET Knob
16. VOLUME Control
DIMMER FUNCTION
• Press “DIMMER” knob to change the LCD display brightness.
• Press “COLORS” knob to repeatly select the multi-color display
changed cyclically as below.
• The clock display and adjustment must be in radio off.