Filter
Top Products
Performance Considerations
Like all speakers, the LS series of Indoor/Outdoor speakers
sound best when placed in the line of sight to the listener,
with no obstructions.
Caution:
Do not place them within two feet of CRT type
television or computer screens, as these speakers are not video
shielded (LCD and Plasma types are not affected).
Connecting the Speakers to Your Audio
System
The LS42/52/62 speakers have convenient color coded 5-way
binding post terminals that will accept 16-12 gauge speaker
wire. After stripping the ends of your speaker wire, open the
binding post to reveal the eye. Thread the wire into the eye, and
close the terminal.
Speaker wire is usually coded to maintain proper system phas-
ing. This can be by color coding, or one conductor may have a
printed marking or a rib along one edge that will not be found on
the other. Identify which type of polarity coding that your wire is
using. You must carefully observe that the positive terminal of
the speaker output on your amplifi er is connected to the posi-
tive terminal of the LS42/52/62 speaker. Likewise, the negative
terminal of the amplifi er’s speaker output should be connected
to the negative terminal of the LS42/52/62 speaker (Fig. 2).
LS42 Specifi cations
Frequency Response
100 Hz to 20 kHz
Impedance
8 Ohm
Sensitivity
85dB, 2.83V
Recommended Amp Power
Recommended Amp Power
25 to 100 Watts Continuous
Woofer
4” Poly Cone w/ Butyl Rubber Surround
Tweeter
1” Fabric Dome Tweeter
Dimensions
5 11/16” x 8” x 5” (145mm x 203mm x 127mm)
Weight
2.2 lbs (1 kg)
LS52 Specifi cations
Frequency Response
85 Hz to 20 kHz
Impedance
8 Ohm
Sensitivity
89dB, 2.83V
Recommended Amp Power
Recommended Amp Power
25 to 100 Watts Continuous
Woofer
5.25” Poly Cone w/ Butyl Rubber Surround
Tweeter
1” Fabric Dome Tweeter
Dimensions
6 3/4” x 9 1/2” x 6 3/8” (170mm x 240mm x 160mm)
Weight
4.2 lbs (1.9 kg)
LS62 Specifi cations
Frequency Response
65 Hz to 20 kHz
Impedance
8 Ohm
Sensitivity
87.5dB, 2.83V
Recommended Amp Power
Recommended Amp Power
25 to 100 Watts Continuous
Woofer
6.5” Poly Cone w/ Butyl Rubber Surround
Tweeter
1” Fabric Dome Tweeter
Dimensions
8” x 11” x 7 1/4” (203mm x 280mm x 184mm)
Weight
5.5 lbs (2.3 kg)
+
-
c
al
B
k
e
R d
Two Year Limited Warranty
AudioSource , a division of Rodin, warrants this product against defects in
materials and workmanship for a limited period of time. For a period of two (2) years
from date of original purchase, we will repair or replace the product, at our option,
without charge for parts. Customer must pay for all labor charges associated with the
removal and re-installation of speakers for the limited period and all parts and labor
charges after the limited warranty period expires. The limited warranty period for fac-
tory refurbished products expires after ninety (90) days from date of original purchase.
This limited warranty applies only to purchases from authorized AudioSource Retail-
ers or Distributors. This limited warranty is extended only to the original purchaser and
is valid only for consumers in the United States.
Consumers are required to provide a copy of the original sales invoice from an
authorized AudioSource Retailer or Distributor when making a claim against this
limited warranty. This limited warranty only covers failures due to defects in materials
or workmanship that occur during normal use. It does not cover failures resulting from
accident, fi re, fl ood, misuse, neglect, mis-handling, mis-application, alteration, faulty
installation, modifi cation, service by anyone other than AudioSource, or damage that
is attributable to Acts of God. It does not cover costs of transportation to AudioSource
or damage in transit. The customer should return their defective product, freight pre-
paid and insured, to AudioSource only after receiving a Return Authorization.
Repair or replacement under terms of this warranty does not extend the term of this
warranty. Should a product prove to be defective in workmanship or material, the
consumer’s sole remedies will be repair or replacement as provided under the terms
of this warranty. If the defective product is discontinued AudioSource may replace the
product with an equivalent or superior product at its option. Any cost of re-installation
or repair of wall or ceiling surface is the sole responsibility of the customer and that
cost shall not be the responsibility of AudioSource. Under no circumstances shall
AudioSource be liable for loss or damage, direct, consequential or incidental, arising
out of the use of or inability to use the product. There are no express warranties other
than described above.
Figure 2
To amplifi er
Rodin 9200 North Decatur Street Portland, Oregon 97203
Tel: 503.286.9300 Fax: 503.978.3381 Tech Support: 800.950.1449
Web: www.audiosource.net Email: info@rodinaudio.co
m