Filter
Top Products
AE4SW
dimensions: 8-1/2” x 4-1/2“” x 1-3/4” (216
x 115 x 45mm)
Two Year Limited Warranty
AudioSource a division of Peak Audio Group, llc, warrants this product against defects in materials and workmanship for a limited period of time. For a period of two
(2) years from date of original purchase, we will repair or replace the product, at our option, without charge for parts. Customer must pay for all labor
charges associated with the removal and re-installation of this product for the limited period and all parts and labor charges after the limited warranty
period expires. The limited warranty period for factory refurbished products expires after ninety (90) days from date of original purchase. This limited
warranty applies only to purchases from authorized AudioSource Retailers or Distributors. This limited warranty is extended only to the original
purchaser and is valid only to consumers in the United States.
Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource Retailer or Distributor when making a claim
against this limited warranty. This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It
does not cover failures resulting from accident, fire, flood, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, modification,
service by anyone other than AudioSource, or damage that is attributable to Acts of God. It does not cover costs of transportation to AudioSource or
damage in transit. The customer should return their defective product, freight prepaid and insured, to AudioSource only after receiving a Return Authorization.
Repair or replacement under the terms of this warranty does not extend the term of this warranty. Should a product prove to be defective in workmanship
or material, the consumer's sole remedies will be repair or replacement as provided under the terms of this warranty. If the defective product is
discontinued AudioSource may replace the product with an equivalent or superior product at its option. Under no circumstances shall AudioSource
be liable for loss or damage, direct, consequential or incidental, arising out of the use of or inability to use the product. There are no express warranties
other than described above.
Installation Precautions (continued)
• Under no circumstances turn off the power protection
circuit unless your amplifier can handle the combin
ed
impedance of all zones activated.
For example:
With the power protection circuit switch in the “OFF”
position, an AE4SW with four pairs of 8 ohm speakers
connected will present the amplifier with a 2 oh
m
load per channel. This may damage your amplifier
o
r
cause it to shut down.
With the power protection circuit switch “ON”, an AE4SW
with four pairs of 8 ohm speakers connected will present
the amplifier with a 6 ohm load per channel which
will not present a problem for most amplifiers.
Consult your authorized dealer and/or the own
er’s
manual for your amplifier for complete details.
• Power handling without the protection circuit switch
engaged is 140 watts per channel.
• Power handling with the protection circuit switch
engaged is 70 watts per channel.
Total Zones
Connected
1-2
3-4
IF USING AE100VC IMPEDANCE MATCHIN
G
VOLUME CONTROLS IN EACH ZON
E
Protection
Switch
May Be Off
May Be Off
Power Capacity
Per Channel
140
Watts
140
Watts
3-4
Must Be On 70
Watts
Operational Details
1. Zone Select Switch
Use labeling kit for zone identification. Press in to se
nd
music to the zone controlled by each switch.
2. Input Terminal
Connects speaker cable from amplifier to AE4SW unit.
3. Pass Through Terminal
Connects speaker signal to other AE-SW units. Do not
connect to speakers! Amplifier damage may occur.
4. Power Protection Circuit Switch
Read Installation Precautions section of this manual
for
full instructions regarding the use of this switch.
5. Zone 3-4 Output
6. Zone 1-2 Output
Installation Precautions
• Never place the AE4SW where it would be exposed
to excessive moisture or heat.
• Allow for a minimum of 1 inch of clearance above
the top of the unit.
1 inch (25mm) Space Above
1
ZONE 1
ZONE 2
ZONE 3
ZONE 4
4
+ - - +
+ - - +
2
3
ZONE 1 ZONE 2 ZONE 3 ZONE 4
INP
UT
OUTP
UT
+ - - +
ON
OFF
PROTECTI
ON
CIRCUIT
SWITCH
WARNING
READ INSTRUCTIONS BEFORE
DISABLING PROTECTION
5
6