ATON O41 Portable Speaker User Manual


 
© 2007 • All rights reserved. Page 5
Storm Series Outdoor Speakers
Mounting
Use the included Mounting Brackets to securely mount the speakers in the desired location.
To install the brackets on wood surfaces, vinyl siding, etc.:
Place brackets in desired location.
Mark location of holes at the narrow
point of the keyhole cutout.
Drill pilot holes..
Partially tighten screws.
Place the brackets in position, then
tighten the screws.
To install the brackets on brick or concrete surfaces:
Place brackets in desired location
Mark location of holes at the narrow
point of the keyhole cutout
Drill holes using a masonry drill bit.
Insert masonry anchors into the holes
previously drilled
Tighten screws partway into the anchors
Mount the brackets then tighten screws
To install the brackets on drywall:
Place brackets in desired location
Mark location of holes at the narrow
point of the keyhole cutout
Drill holes using a drill bit.
Insert drywall anchors into the holes
previously drilled
Tighten screws partway into the anchors
Mount the brackets then tighten screws
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Screw
Location
Brick/Concrete
Masonry
Anchor
Screw
Drywall
Drywall
Anchor
Screw
Figure 3.7 - Screw Location
Figure 3.8 - Brick/Concrete
Figure 3.9 - Drywall