Filter
Top Products
POCKET RECORD CONTROLS AND FEATURES
INPUTS, CONTROLS, & FUNCTIONS
1. BUILT-IN MICROPHONE “L“CHANNEL - A omni condenser microphone is installed into the de-
vice as the “L” (left) channel.
2. BUILT-IN MICROPHONE “R” CHANNEL - A omni condenser microphone is installed into the
device as the “R” (right_ channel.
3. RECORDING INDICATOR LED - This LED will glow during recording.
4. BUILT-IN SPEAKER - A monitor speaker is installed, this speaker will not function when ear-
phones are plugged in.
5. BATTERY COVER - Open the cover and install two AA batteries into the battery compartment.
6. BATTERY SELECT SWITCH - When primary batteries (or Alkaline batteries) are installed, switch
to “1.5V”. When Ni-MH rechargeable batteries are installed switch to “1.2V”.
7. VOLUME CONTROL KNOB FOR AUDIO-IN “L” CHANNEL.
8. VOLUME CONTROL KNOB FOR AUDIO-IN “R” CHANNEL.
9. AUDIO-IN “L” CHANNEL - This allows audio input of Microphone (M), Guitar (G) or Line In (L). It
provides 1.5V power supply.
10. AUDIO-IN “R” CHANNEL - This allows audio inputs of Microphone (M), Guitar (G) or Line In (L).
It provides 1.5V power supply.
11. AUDIO-IN SELECTOR - Use this selector switch to select one of three types of audio input
types, Microphone (M), Guitar (G) or Line In (L).
©American Audio® - www.americanaudio.us - TT-Record™ Instruction Manual Page 5