POCKET RECORD RECORDING
7
1
2
546
3
RECORDING:
1. You can ONLY record to FOLDER 1. To change to FOLDER 1 press the MODE/STOP button, and
then the MENU button. The LCD will display FOLDER 1 (1), when you are in FOLDER 1.
ory (2). The Pocket Record will change to the SD card memory automatically when an SD card is
MODE/STOP button and then press the RECORD button.
NOTE: When recording to an SD card, please be advised that there might be a 2-3 second
delay after you press the RECORD button.
3. Select a group number from 1 to 9 (3) to record to. To select your desired group number press the
MODE/STOP button and then either the LEFT or RIGHT button to scroll to the number.
4. Press the LEFT or RIGHT buttons to select the track you want to record to. The track range is 1
- 99 (4). The track number you select to record to must be blank. Press the RECORD button to
track that follows the last recorded track number (for example, if the last recorded track number
is 05, the automatically selected track number will be 06).
5. When you press the RECORD button the Recording indicator LED will glow and “ “ will be dis-
played in the LCD. The time clock will also start running (5). You can pause during recording by
you have paused the device. Press the POWER/PLAY button again to continue recording. When
you are done recording press the MODE/STOP button.
6. During recording the volume indicator (6) will be shown on the LCD. The input volume can be ad
recording, otherwise, the recording sound quality will be distorted.
the LCD.
8. For a longer recording time, put the KEY HOLD SWITCH (13) in the ON position. When you are
done switch to the KEY HOLD SWITCH to the OFF position to release the key control.
©American Audio® - www.americanaudio.us - TT-Record™ Instruction Manual Page 8