Filter
Top Products
19-EN
CDE-9874 Series
CDE-9872 Series
An iPod
®
can be connected to this unit by using the proprietary
ALPINE FULL SPEED
™
Connection Cable (KCE-422i) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
• Set AUX+ SETUP to OFF when an iPod is connected (refer to
“Setting the AUX+ SETUP Mode” on
page 18).
• If the Bluetooth Box and an iPod are connected at the same time, be
sure to disconnect the iPod from Bluetooth Box while turning ACC to
OFF.
iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or iPod nano. iPod Shuffle cannot
be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod.
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
• If the unit is used with iPod software versions of iTunes earlier
than 7.1.0.59, correct function and performance are not
guaranteed.
Playback
1
Press SOURCE/ to switch to the iPod mode.
2
Press or to select the desired song.
3
To pause playback, press / /ENT.
Pressing / /ENT again will resume playback.
• A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected Podcast, the episode can be
changed by pressing 1
/AF or 2.
• An episode may have several chapters. The chapter can be changed
by pressing
or .
Searching for a desired Song
An iPod can contain hundreds of songs. By using file tag information
and keeping these songs organized in playlists, this unit’s search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer search mode to narrow
searches based on the table below.
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press /
ESC
to activate the search selection mode.
2
Turn the Rotary encoder (CDE-9874 Series only) or
press
and (CDE-9872 Series only) to select the
ARTIST search mode, and then press / /ENT.
PLAYLIST ARTIST ALBUM SONG PODCAST
GENRE COMPOSER PLAYLIST
3
Turn the Rotary encoder (CDE-9874 Series only) or
press
and (CDE-9872 Series only) to select the
desired Artist, and then press / /ENT.
4
Turn the Rotary encoder (CDE-9874 Series only) or
press
and (CDE-9872 Series only) to select the
desired Album, and then press / /ENT.
iPod
®
(Optional)
VIEW
SOURCE/
//ENT
Rotary encoder
/SOUND
/ESC
Preset buttons
(1 through 6)
45 6
2
1
/AF
VIEW
SOURCE/
/
/ENT
/AUDIO
/ESC
Preset buttons
(1 through 6)
4 5
6
2
1
/AF
Return to the beginning of the current song:
Press .
Fast backward through current song:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward through current song:
Press and hold .
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlist Song — —
Artist* Album* Song —
Album* Song — —
Song — — —
Podcast Episode — —
Genre* Artist* Album* Song
Composer* Album* Song —