Alpine CDE-9872R MP3 Player User Manual


 
17-EN
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
CDE-9874 Series
CDE-9872 Series
1
Press and hold FUNC./SETUP for at least
2 seconds to activate the SETUP mode.
2
Turn the Rotary encoder (CDE-9874 Series only) or
press
and (CDE-9872 Series only) to select the
desired SETUP menu, and then press / /ENT.
(e.g. Select SUBWOOFER)
BT IN*
1
FM-LEVEL REGIONAL*
2
PI SEEK*
3
DIMMER*
4
SUBWOOFER (SUBW SYS) *
5
PLAY MODE INT MUTE*
6
SCROLLTYPE
TEXT SCR POWER IC AUX+ SETUP
AUX NAME*
7
DEMO BT IN
*
1
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
*
2
Refer to “Receiving RDS Regional (Local) Stations” (page 8).
*
3
Refer to “PI SEEK Setting” (page 9).
*
4
CDE-9874RB only.
*
5
Displayed only when SUBW is ON.
*
6
Displayed only when BT IN is OFF.
*
7
CDE-9874 Series only.
3
Turn the Rotary encoder (CDE-9874 Series only) or
press
and (CDE-9872 Series only) to change
the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
Press /SOUND (CDE-9874 Series only) or /AUDIO
(CDE-9872 Series only) to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the Bluetooth Connection (BT IN)
If an optional Bluetooth Box (KCE-300BT) is connected, you can place
a hands-free call by a Bluetooth-equipped mobile phone. Make this
setting when the Bluetooth Box (KCE-300BT) is connected and the
Bluetooth function is used. For details, refer to the Owner’s Manual of
the optional Bluetooth Box (KCE-300BT).
Set ADAPTER when the Bluetooth Box (KCE-300BT) is connected.
The PHONE button can be used only when the optional Bluetooth
Box (KCE-300BT) is connected.
Adjusting Source Signal Levels
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
Subwoofer On and Off
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press Rotary encoder (AUDIO)
(CDE-9874 Series only) or
/AUDIO (CDE-9872 Series
only) repeatedly to select the SUBW mode.
2 Adjust the level by turning the Rotary encoder
(CDE-9874 Series only) or pressing and
(CDE-9872 Series only).
*
1
CDE-9872 Series only.
Setting the Subwoofer System
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
Dimmer Control (CDE-9874RB only)
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night.
SETUP
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
Rotary encoder (AUDIO)
//ENT
/SOUND
FUNC./SETUP
SOURCE/
//ENT
/AUDIO
FUNC./SETUP
Bluetooth Setting
BT ADAPTER / BT OFF (Initial setting)
Sound Customizing
FM-LV HI (Initial setting) / FM-LV LOW
SUBW ON (Initial setting) / SUBW OFF
SUBW BASS TREBLE BAL FADER LOUD*
1
DEFEAT VOLUME SUBW
SUBW SYS 1 (Initial setting) / SUBW SYS 2
SUBW SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Visual Customizing
DIM AUTO (Initial setting) / DIM MANUAL