Filter
Top Products
9-EN
01GB04CDE-125EBT.fm
ALPINE CDE-125EBT 68-16909Z39-A (EN)
3
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
4
To pause playback, press //ENT.
Pressing //ENT again will resume playback.
5
To eject the disc, press .
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold for at least 2 seconds.
• The “ ” indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs cannot be used.
• The CD-player can play discs containing audio data and MP3 data.
• The track display for MP3 data playback is the file numbers recorded
on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3 Play Display
The folder number and file number will be displayed as
described below.
• Press VIEW to switch the display. See “Displaying the Text”
(page13) for information about display switching.
Repeat Play
Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode:
MP3 mode:
M.I.X. (Random Play)
Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 again.
CD mode:
MP3 mode:
* In the USB mode, all files stored in the USB memory are played back
in random sequence, and the “ ” indicator lights up.
F101 T103
Folder number
display
File number
display
: Only a track is repeatedly played back.
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
: The tracks are played back in random sequence.
: Only files in a folder are played back in
random sequence.
: The files are played back in random sequence.
01GB00CDE-125EBT.book Page 9 Monday, September 27, 2010 10:08 AM