Filter
Top Products
Instruction Manual MP3 F850 Player/FM Tuner
Page 16 of 27
Step 3: Press to select the
desired bit rate.
Note:
1, According to the different of MPEG mode you selected, the choice of bit rate will be
different.
If you selected MPEG-1, options are as follows: 32, 40, 48, 56, 64, 80, 96, 112, 128,
160, 192, 224, 256
If you selected MPEG-2, options are as follows: 16, 24, 32, 40, 48, 56, 64, 80, 96, 112,
128,144, 160
If you selected MPEG-2.5, options are as follows: 8
2. The higher the value selected, the better the recording effect.
1.14.1.4 SILENCE SETTING
Step 1: Press to enter the menu
selection.
Step 2: Press to select the
“SILENCE” option.
Step 3: Press to select the
option
Note:
1. There are three options to choose from: LOW (default ), MID, HIGH .
2. The operation influences the result of VAD. The higher the level you select, the higher
the sensitivity will be.
1.14.1.5 SYNCHRONIZING SETTING
Step 1: Press to enter the menu
selection.
Step 2: Press to select the “SYN
SETTING” option.
Step 3: Press to select the
option.
Note:
1, There are two options to choose from: ON (default)/ OFF
1、 When the synchronizing setting is ON, the system will automatically go to the next file if
it can’t detect an audio signal.