a/d/s/ L210w Portable Speaker User Manual


 
How the brackets should be fastened to the mounting surface depends on the structure and material
of the mounting surface. There are two typical situations. One is with the brackets attached to a
conventional wall constructed with drywall material over wood studs. The other situation is with the
brackets mounted to a wood cabinet or some other solid material. When the speakers are mounted on
drywall the plastic screw anchors will be used in conjunction with the screws. When the speakers are
mounted on a solid panel the screws anchors will not be needed. Driving the screws directly into the
solid panel will provide a strong enough mounting.
The L-series speaker system is supplied with brackets for horizontal or vertical mounting. Pick the
correct bracket for your application, and set the bracket in the installation location. Be sure it is
straight. Using the bracket as a template, mark the location of the two mounting screw holes. Set the
bracket aside. If the plastic anchors will be used drill the holes for them with a 1/4" bit. If only the self
tapping screws are used, drill pilot holes with a 1/8" bit. Push the plastic screw anchors, if they are
being used, into the holes drilled for them. NOTE: If the speakers are being mounted horizontally the
opening in the end of the mounting brackets should be oriented upward.
3