a/d/s/ L210b Portable Speaker User Manual


 
specifications
L210
Driver complement 1"/ 25 mm copolymer dome tweeter with a Ferrofluid™ cooled, oxygen
free copper voice coil wound on a Kapton
®
former.
4” / 104 mm high compliance tapered copolymer cone with butyl surround
and OFC voice coil wound on a Kapton
®
former.
Frequency response: 85 - 20kHz, ± 3dB*
Impedance: 4 Ohms nominal.
Efficiency: 88 dB SPL from 2.8 VRMS (“1 Watt”) pink noise input at 1 meter.*
Crossover: 2.5 kHz with 12dB / octave slopes.
Recommended
amplifier power range: 10 Watts - 50 watts RMS.
Cabinet size: 7 1/8" h x 4 7/16" w x 5" d (including grille).
182mm h x 112mm w x 127mm d
*Measured under laboratory conditions.Specifications subject to change.
L310
Driver complement 1"/ 25 mm copolymer dome tweeter with a Ferrofluid™ cooled, oxygen
free copper voice coil wound on a Kapton
®
former.
5 1/4” / 131 mm high compliance tapered copolymer cone with butyl
surround and oxygen free copper voice coil wound on a Kapton
®
former.
Frequency response: 68 - 20kHz, + 3dB*
Impedance: 4 Ohms nominal.
Efficiency: 90 dB SPL from 2.8 VRMS (“1 Watt”) pink noise input at 1 meter.*
Crossover: 2.5 kHz with 12dB / octave slopes.
Recommended
amplifier power range: 10 Watts - 75 watts RMS.
Cabinet size: 8 11/16" h x 5 13/16" w x 6 1/8" d (including grille).
220mm h x 148mm w x 156mm d
*Measured under laboratory conditions.Specifications subject to change.
6