Washer Installation
l
Model LCR7244D comes equipped for portable
installation.
. Model LCR5232D comes equipped for permanent
installation.
Both models can be converted to portable or perma-
nent installation. In the U.S.A., call our Consumer
Assistance Center and in Canada contact your
Whirlpool Dealer to obtain kit numbers.
Portable one-faucet connection
NOTE: Make sure the lid Is closed before moving
the washer.
l
Use the hose connector provided with the washer for
a one-faucet connection.
l
To convert Model LCR5232D for portable installation,
call our Consumer Assistance Center number at
l-800-253-1301 from anywhere in the U.S.A. In
Canada, call your authorized Whirlpool Dealer.
l
Set the Temperature Selector to Warm/Warm or to
Warm/Cold (depending on your model).
l
Attach the hose connector to the faucet adapter by
pulling down on the locking collar while lifting up on
the connector until it snaps into place.
l
Slowly turn the water faucet on all the way.
Faucet adapter
Hose connector
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions can result
In death or electrical shock.
l
Pull the electrical power cord from the storage area in
the back of the washer. Plug the power cord into a
3-prong grounded outlet.
Water temperature adjustment:
Adjust water temperature as follows:
l
Wash Water: Adjust faucets for wash water tempera-
ture prior to the fill for wash.
l
Rinse Water: Adjust faucets for temperature prior to
fill for rinse.
NOTE: Always use cold rinse water for permanent
press fabrics.
4
