X’s-Drive II
+
VP2160
13
at Digital Camera Stores.
10 If an erroneous display /operation occurs :
_________________________________________________________________
1) When the device error message pop on screen , there may be a chance of
corrupt data or the memory card is damaged , you can change another
memory card .
2) If any shut down caused by erroneous operation , you can depress the [reset]
button located on the left to switch off the main unit .
3) If the unit operated via USB on to PC while the batteries are low, erroneous
display /operation may occur, if this happens ,unplug the USB cable, and press
the [reset] button .
11. Care for the Hard Drive and unit :
_________________________________________________________________
1) If the computer or VP2160 can not detect the Hard Drive, check the suggested solutions:
y Check the flat connector is plugged securely or not
y Driver is not install -then reinstall
y It is not recommended to format the 32G above Hard Disk under Windows 2000
or Windows XP
Note: Win 2K/ Win XP can not support Format Disk for 30G above Hard Drive.
2) Please don't use force when connecting the flat cable with the unit and
Hard Drive .
3) To keep your hard drive in better operating performance, we recommend to
periodically run Scan Disk and Disk Defragmenter .
4) Hard Drive must be formatted to the FAT or FAT-32 format, NTFS format is not
compatible with this function .
5) Please carefully insert and remove the memory card from each slot .
6) Do not drop, jar , bump , shock the unit , or expose to severe vibration
while data is being transmitted .
7) To reduce the risk of electronic shock , do not remove cover (or back )
8) To reduce the risk of fire or shock hazard, do not expose this equipment to rain ,
any liquid or moisture.
