My display is too dark is there any way to increase the brightness?

Asked by Gerard on 03/07/2013 7  Answers

ManualsOnline posted an answer 11 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 What worked for my Sony Dream Machine ICF-C218. 1. Take out battery underneath unit. 2. Unplug alarm from outlet for a few seconds 3. Plug back in. The display should be noticeably brighter. This must reset the unit back to factory brightness. Also, the alarm kept my settings. :) 4. Put back in old battery, if preferred. Notice, there is a low battery light indicator on the alarm, no need to replace the battery unless dead. Also, there may be a dim button sequence that is not mentioned in the PDF.
Was this answer helpful?
5 i went throught the same problem and figured it out, disconnect the device and fip it over, on the bottom there is a little cover, unscrew it and you will see a battery, i replaced that battery, connected the device again and got a shiny display again, hope it helps you.
Was this answer helpful?
2 Press the snooze button 4 times. The display toggles between lo/high brightness. ;-).
Was this answer helpful?
0 Nothing in the manual about increasing brightness...thanks
Was this answer helpful?
0 Nothing in the manual about increasing brightness...thanks
Was this answer helpful?
0 Thanks Jose That did the trick. It seems strange they rely on a battery to regulate the brightness as it should be for backup only. Bad design! My previous model had a brightness adjustment.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.