Filter
Top Products
EN EN
CD player
4
Random Playback
During playback, press to play tracks
randomly.
In stop mode, press to activate random
function and press PLAY/PAUSE to
begin random playback.
The icon appears on display when random
playback is activated.
Press again for de-selection.
Programming
1. Press PROG. to enter program mode. The
program location will flash once on the
display. Then the track number stored in the
memory location will keep flashing.
If the memory location is empty, 00 will be
flashing.
2. Press or to select the track
you want to program.
3. Press PROG. again to confirm your selection
and access the next program location.
4. Repeat steps 2 to 3 to program to a
maximum of 20 tracks.
5. Press PLAY/PAUSE in program mode to
start program playback (PROG. indicator
remains lit on the display).
Press STOP to return to normal playback
mode.
3
Display
Radio
Tuning to a station
1. Select RADIO from the SELECT
switch.
2. Slide BAND to select between MW/FM band.
3. Rotate < TUNING > to select radio station.
Playing disc
This unit is compatible with audio CD-R
discs.
1. Selects CD from the SELECT switch.
2. Press OPEN to open disc compartment
door.
3. Insert a disc with label face up.
4. Push CLOSE to close disc compartment door.
Total number of track on disc can be read
from display.
5. Press PLAY/PAUSE to begin CD playback.
6. Press or to skip to previous
or next track respectively.
7. Press and hold or to
search quickly current track backward or
forward respectively.
8. Adjust MIN. VOLUME MAX. to your desired
listening level.
9. Press PLAY/PAUSE or STOP to pause or stop
disc playback respectively. To resume
playback, press PLAY/PAUSE again.
Track number (shows during
disc playback)
Mix play
Repeat mode (REPEAT 1 - repeat
current track, REPEAT ALL - repeat
entire disc)
Program mode
REPEAT 1 ALL
PROG.
SELECT
CD
RADIO
TAPE
(OFF)
SELECT
CD
RADIO
TAPE
(OFF)
4. Adjust MIN. VOLUME MAX. to your desired
listening level.
TipTip
TipTip
Tip:
Extend or reposition the antenna for
better FM reception. Move the unit
for better MW receptions
Repeating
Press REPEAT once to repeat current track and
REPEAT 1 icon shows on display.
Press REPEAT twice to repeat entire disc and
REPEAT ALL icon shows on display.
Press REPEAT a third time to turn off repeat
mode.
TipTip
TipTip
Tip:
If you are in normal playback mode
but want to play the saved program.
Press
PROG.PROG.
PROG.PROG.
PROG. and then
PLAYPLAY
PLAYPLAY
PLAY.
Clearing program list
Your program will be erased once you open the
disc compartment door or change to another
source mode (e.g. radio, tape).
NoteNote
NoteNote
Note:
When random playback is
activated, only Repeat All can be
selected.
TM9237 EN 6/24/05, 5:36 PM4-5